Error in LoPy firmware upgrade when using local file for both cli and gui (Linux)
-
I have the following setup in Linux: Pytrack (firmware fully updated) + LoPy (the old one, not LoPy4).
I tried to update the firmware of LoPy using a local tar file downloaded from https://github.com/pycom/pycom-micropython-sigfox/releases but failed.
I used both the GUI and the CLI versions.
For CLI I ran:sudo pycom-fwtool-cli -v -p /dev/ttyACM0 -s 115200 flash -t /path/to/file.tar.gzand gotRunning in PIC mode Product ID: 19 HW Version: 3 FW Version: 0.0.8 Connecting..... Uploading stub... Running stub... Stub running... Invalid script command fFor the GUI method I got the error shown in screenshot.
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login