No gpy wifi AP on power up

[kjm]

My gpy no longer establishes an ad hoc wifi on powerup. Both main.py & boot.py are empty so something else in flash is permanently disabling the bootup AP.

Pycom MicroPython 1.18.1.r4 [v1.8.6-849-dfa1176] on 2018-11-12; GPy with ESP32
Type "help()" for more information.
>>>
>>> from network import WLAN; wlan=WLAN(); print(wlan.mode())
1
>>>

the mode=1 tells me it's booting in STA mode, but it's not configured

>>> wlan.ifconfig()
('0.0.0.0', '0.0.0.0', '0.0.0.0', '0.0.0.0')

Presumably come config parameter in flash is responsible but I can't find any hint in the docs as to what it could be?

[kjm]

@kjm I just double checked this. Beware boys & girls. pycom.wifi_on_boot(0) not only permanently disables the power up ad hoc wifi it breaks the gpy FTP server so that it won't work on any wifi network you subsequently join.

[kjm]

Yea! That worked (once I removed the capitals). Interesting side bonus. The gpy FTP refused Filezilla connections in STA mode through my router once I lost the powerup ad hoc network, FTP now working again in both STA & AP modes. Can you tell me where in flash the pycom.wifi_on_boot(1) flag is stored? Is there a list in the docs somewhere of other flags that permanently alter the gpy? If so could you link me to it?

[wghirakawa]

@kjm in your pymakr terminal try

Import machine
machine.reset()
#once reset try
Import pycom
Pycom.wifi_on_boot(True)
Import machine
Machine.reset()

If that doesn't work, I would suggest re flashing the firmware. Make sure you have the up-to-date firmware.