Connect FiPy with Lora OTAA to TTN?

[chumelnicu]

@harm yes...what kind of gateway do u use ? ...and what distance is from node to gateway?

[ray]

@chumelnicu

I'm not sure if you were asking me or Harm, but my TTN gateway is a Raspberry Pi with Rising HF RHF0M301 8 channel.

Distance to gateway is about 40 ft vertically.

[ray]

This post is deleted!

[ray]

I found the problem, there was a mismatch with the Device EUI

from network import LoRa
import binascii
lora = LoRa(mode=LoRa.LORAWAN)
print(binascii.hexlify(lora.mac()).upper().decode('utf-8'))

Put that serial number into the device settings on the TTN console.

Also I deleted all channels and added only the AU915 uplink channels

for i in range(0, 72):
    lora.remove_channel(i)


lora.add_channel( 8, frequency=916800000, dr_min=0, dr_max=3)
lora.add_channel( 9, frequency=917000000, dr_min=0, dr_max=3)
lora.add_channel(10, frequency=917200000, dr_min=0, dr_max=3)
lora.add_channel(11, frequency=917400000, dr_min=0, dr_max=3)
lora.add_channel(12, frequency=917600000, dr_min=0, dr_max=3)
lora.add_channel(13, frequency=917800000, dr_min=0, dr_max=3)
lora.add_channel(14, frequency=918000000, dr_min=0, dr_max=3)
lora.add_channel(15, frequency=918200000, dr_min=0, dr_max=3)

Excuse the double posting, I couldn't get the code markers working.

[Harm]

@ray It is a RaspberryPi 3 with IMST iC880A. About 10 meters vertically above me. Other nodes have no problems communicating with it. The Fipy's connect request is received and visible in TTN's console. Though the application keeps saying 'Not yet joined'.

[Harm]

Thank you for your responses. There is hope;-)

(@chumelnicu: sorry, the previous was my answer to you ;-))

@ray : Thank you for your answer though I already did (print out and) put the serial number into the Device EUI in the TTN's console. That is were you put it as well I assume? After that the TTN console's data panel did display the connect request though the Fipy never gets past the message 'Not yet joined...'. That's why I suspect the Fipy never receiving the answer from the Gateway (although that is being send according to the Gateway's logging).

I did not yet remove and add any channels and will try that as soon as I've got time. First I have to figure out the European settings though.

@chumelnicu : did you use any European settings and get it running 'out of the box'?

[ray]

Hi Harm,
Here is the source I'm running (file attached), you will need to change to uplink frequencies that suit your local gateway.

And here is the TTN device data screen

0_1518054650154_LoRaWAN.py

[Harm]

@ray Thanks Ray, I compared your code to mine and .. found the problem in my code. When getting that Device EUI two weeks ago, I must have put and left one initialization too many in my code. Taking it out... makes it work immediately.

So, I did not have to take out the frequency settings too let it work. Just making sure that the right Device EUI is in TTN should make the standard code work.

Thanks all for your answers! Solved;-)

[smnc]

@harm hi, how did you do ABP connection ? I tried but it is not working. And i want to know just one device enough for send data to TTN?

[robert-hh]

@smnc As prerequisite for a ABP join you have to register an applications and in the application your device at the TTN server. See https://docs.pycom.io/gettingstarted/registration/lora/ttn.html
If during device registration you select ABP, the device address and communication keys are generate by the server. This data, device address, network session key and application software key, have to be used in your script. You just copy the from you web site and put them into your script. This data will not change, unless you ask at the server to do so.
TTN has a message playback protection. That might be a problem during testing. You can disable that in the device setting at the TTN server.
To be able to exchange data with the TTN server, you need a node (you Fipy) and a gateway. If there is a gateway close enough you can use that one. Gateways typically accept messages from any node.
LoRa uses vertical polarity, so put your antenna upright. Not doing will not harm your device, but lower the chance of successful communication.