How to find out which modem firmware a FiPy has installed?
-
Is it possible to find out if a FiPy is running the NB-IoT or LTE Cat M1 firmware from Sequans (a command)? I now that it is shipped with Cat M1 but if you have some FiPys that you have installed the NB-IoT firmware on and some with Cat M1 and accidentally mix them around on your desk....
-
Open a terminal connection to the board.
Run:
import sqnsupgrade sqnsupgrade.info()It should tell you the version in the output at the bottom.
-
@paul-thornton said in How to find out which modem firmware a FiPy has installed?:
import sqnsupgrade
How do I interpret the printout from the command. I.e. is this device in particular running the NB1 or the Cat M1 firmware?
import sqnsupgrade
sqnsupgrade.info()
<<< Welcome to the SQN3330 firmware updater [1.2.1] >>>
FiPy with firmware version 1.18.1.r7
Your modem is in application mode. Here is the current version:
UE5.0.0.0d
LR5.1.1.0-39529 -
@arneme Ahh, apologies. I forgot it didnt mention that at the end. That said. That's CAT-M1. (we have only released a CAT-M1 with a version of 39529 that I can see. - the last part of: LR5.1.1.0-39529 is the version number.)
-
@paul-thornton OK, thanks. I noticed that on a device with NB-IoT firmware the result was:
Your modem is in application mode. Here is the current version:
UE6.0.0.0
LR6.0.0.0-40343Which I believe is the latest NB-IoT firmware version number (40343).
-
@arneme Yup. Thats Correct.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login