Firmware release 1.0.1.b1

[TravisT]

@sakis
Thank you sir!

[livius]

@daniel
can you add to updater tool option to use files from dir not from internet?
e.g.

1. i can transfer all files to pendrive and go to computer without internet connection and update my board
2. i can change something in source code and do custom make
   and need to flash it to the board
   previously i do this simple by replace files in "updater" folder and run updater tool

[DongYin]

@daniel
I set my Lopy to WLAN.STA mode and connect it with the router, then i ping it's IP address on my computer successfully.
But if there is a way i can ping the IP address of my computer on the Lopy.
If and how i can save any data to the flash?

[livius]

@DongYin said in Firmware release 1.0.1.b1:

If and how i can save any data to the flash?

you can write files to the `\flash' folder without any problem

[Ralph]

@livius, before Daniel replies, let me add that (if you didn't know this already,) you can still update your board manually by placing the bin file in the /sys directory on the board itself using FTP, then rebooting the board. Your idea of making it an option in the updater would probably be better, but until that happens, you can do it this way.

Edit: This works even nicer:
make BOARD=LOPY ESPPORT=/dev/ttyUSB0 flash

[livius]

@Ralph said in Firmware release 1.0.1.b1:

make BOARD=LOPY ESPPORT=/dev/ttyUSB0 flash

what this command flash do?
write e.g. appimg.bin or also partition.bin, bootloader.bin some other things like erase mem...

EDIT

placing the bin file in the /sys directory on the board itself using FTP, then rebooting the board

this does not work for me - but i tested this tommorow only once at night
then maybe i do something wrong
when i do this and restart the board it do not run

i then reflash it with the updater tool once again
and flash board with command line to put my custom source code make
updater.py -f ......
but i must change script of updater.py and remove erase_sytem_mem steap
from some reason this steap time out
a little hint here 'erase_sytem_mem' have one letter typing error should be 'erase_system_mem' ;-)

[Ralph]

@livius it writes all three .bin files, but it doesn't erase anything else on the file system.

[livius]

@Ralph
thank you for the explanation
one question here - why then updater tool do erase mem?

EDIT:
and for windows it is like this?
make BOARD=WIPY ESPPORT=COM6 flash

[Ralph]

@livius As I understand from my colleagues, the updater tool does the same as the flash command does: it only erases what it needs to, to write the firmware, partition and bootloader.

And yes that looks about right to me for windows. ESPPORT just needs to be the full comport.

[livius]

@Ralph
ok - maybe this steap is unnesceserry at all it is used only if args.tar = None
in update.py is

    def erase_sytem_mem(self):
        # Erase first 3.5Mb (this way fs and MAC address will be untouched)
        self.erase(0, 0x3100000)

i will use flash switch from make
thank you again

[DongYin]

@livius said in Firmware release 1.0.1.b1:

@DongYin said in Firmware release 1.0.1.b1:

If and how i can save any data to the flash?

you can write files to the `\flash' folder without any problem

Thank you! i used uos.mkdir("setting.ini") to write a file to '\flash', then how to write&read it by programs?

[livius]

@DongYin
look at:
https://docs.python.org/3/tutorial/inputoutput.html
there are paragraphs about files
also look here
https://docs.pycom.io/pycom_esp32/library/uos.html

os.mkdir create directory