Is the L01 specsheet correct?
-
Hi all?
I'm wondering a little bit, of some things in the L01 specsheet. On page 7 it is denoted that P20 (GPIO_33) is connected to the on-board RGB LED. This is probably a copy/paste error from the Lopy1 specsheet because the L01 has no LED.
But if I now have a look in the schematics of the universal reference board, the RGB LED is connected to P2 (GPIO_0). As far as I understand, if I put a L01 on a universal reference board, I have a "Lopy1", isn't it?
I think, the LED is connected to GPIO_0. Can someone confirm this. I have no Lopy or universal reference board here, to check it by myself.Cheers,
Thomas -
@thosch42 The LED is indeed connected to P2 = GPIO0.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login