GPy Initial Startup Connection Issues
-
Hi, I just received the GPy module with the Expansion board 3.0. I updated the expansion board 3.0. Then attached the it as described. I see that the board is not detected with the gpy attached on the mac.
Only Expansion board 3.0 is able to connect:
Few resets sometimes results in constant Red Led or green led blinks on the gpy.
Has anyone had similar issues?
-
@aventri My guess is that you haven't installed the drivers to allow you PC to see the Expansion Board com port? When I was starting with GPY, I found this tutorial from Core Electronics in Australia, to be very helpful..
https://core-electronics.com.au/tutorials/pycom-gpy-getting-started.htmlIt is Windows centric, but there are others to be found as well
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login