Display SSD1306 with lopy4 doesn't work

[geda]

Hello,
I am trying to display something on an oled 1306 with lopy4, but it doesn't work.
I have try SPI with this librairie https://github.com/dmitryelj/LoPyI2CLCD.

I have bought this piece on aliexpress: https://fr.aliexpress.com/item/1-3-inch-Blue-OLED-Module-SSD1106-Drive-IC-Compatible-with-SSD1306-IC-128-64-IIC/32655103082.html?spm=a2g0s.9042311.0.0.27426c37EFOTpR

Any idea of what could be wrong ?

Code
f name == "main":
import sys, machine, os

print("Started")

displayType = kDisplaySPI128x64
initialize(displayType)
if isConnected():
    set_contrast(255) # 1-255
    displayOn()
    clearBuffer()
    addString(0, 0,  sys.platform + " " + sys.version)
    addString(0, 1,  "---")
    #addString(0, 2,  "CPU: {} MHz".format(machine.freq()[0]/1000000))
    #addString(0, 4,  "Version: {}".format(os.uname().release))
    addString(0, 5,  "LoPy font test")
    addString(0, 6,  "AaBbCcDdEeFfGgHhIi")
    addString(0, 7,  "0123456789012345")
    drawBuffer()
else:
    print("Error: LCD not found")

print("Done")

[geda]

@paul-thornton no error display on the console and the display does not show anything. I give up with this module.

[geda]

@robert-hh , Yes I have check that the jumper is not soldered (spi mode). I did not work with your librarie as well, so give up and will order a new display.
Thanks for your help

[robert-hh]

@geda The device can be operate deither in SPI or I2C mode (soldered jumper at the back side). Did you check that it is SPI?
And it tells that it's a SSD1106 driver chip. I cannot find any data sheet for that. Could be an SH1106. For that one, I have a driver here, initially made for ESP8266. https://github.com/robert-hh/SH1106

[Paul Thornton]

Do you see any errors in the console?
Does yours "test" string print out ok?

or Is it simply that it wont display anything on the screen