Trouble uploading to FiPy



  • Hello, I'm having a problem uploading to my FiPy,

    This is the last message I received after trying a hard reset:

    rst:0x7 (TG0WDT_SYS_RESET),boot:0x16 (SPI_FAST_FLASH_BOOT)
    configsip: 0, SPIWP:0xee
    clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
    mode:DIO, clock div:1
    load:0x3fff9028,len:8
    ���x��xx�xxf�x��f������x������x���x��f������������x~f�������怘����x���x��f������x怘�f����f�����f���Traceback (most recent call last):
    File "main.py", line 4, in <module>
    ImportError: no module named 'LIS2HH12'

    But most of the time I get this message:

    Uploading project (main folder)...
    Safe booting device... (see settings for more info)
    Safe boot failed, uploading anyway.
    Upload failed.: timeout Please reboot your device manually.

    Would be very grateful for any help you could give. The board is brand new so the firmware should be up to date


    Log in to reply
     


  • I had the same problem for FiPy but not sure if it is the same reason. But for my case after I updated the firmware for the FiPy it works normally now. Try it.
    Download the firmware update tool from the link below
    https://docs.pycom.io/gettingstarted/installation/firmwaretool.html#first

    Please be aware that the firmware for the FiPy is different the firmware for the Pysense.


Log in to reply
 

1 out of 2

Pycom on Twitter