Testing nanogateway with lorawan devices
-
Hi,
I'm running the nanogateway example on this setup:
(sysname='LoPy4', nodename='LoPy4', release='1.20.0.rc13', version='5bddb57-dirty on 2019-09-19', machine='LoPy4 with ESP32', lorawan='1.0.2', sigfox='1.0.1')I'm trying to connect some lorawan (OTAA) devices that a buy. But the nanogateway but the majority otaa joins and uplinks
fails. But if i use a lopy4 runing the node_otaa example, the join and uplinks work well.
Have someone run with the same issue?Cumps,
Luís Santos -
@serafimsaudade the nanogateway only supports one channel, which means it is not lorawan compliant. The lorawan devices you bought probably require a lorawan compliant gateway.
-
@mfalkvidd Hi, tks for the reply.
Ok, that explains the problems that I have.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login