How to get v1.20.1 without pybytes for Lopy4?

[KenM]

How to get v1.20.1.r1 without pybytes for Lopy4?
Boot without wifi doesn't work as it should. (I assume pybytes is the reason)
I still see 120mA until I do a deinit after pybytes started

The machine.deepsleep is using 35µA more current with the 1.20.0.rc13

[KenM]

@robert-hh

Ok thanks, I see the R13 can get lower than 70µA average like 35µA, it may also be related to the measure settings due to the very short 0.3mA spikes in deepsleep

[andreas]

Hi there,

@robert-hh: Thanks for pointing @KenM to these firmware images already. The most recent one for the LoPy4 would be LoPy4-1.20.1.r1-0.7.0-vanilla-dragonfly-onewire-i2s.tar.gz, which will also give you native support for 1-Wire/DS18X20 as well as I2S support for free.

Please also notice the respective Installation instructions and the Notes for LoPy, LoPy4, SiPy and FiPy devices.

With kind regards,
Andreas.

[robert-hh]

@KenM @andreas maintains a set of various 1.20.1r1 images without pybytes here: https://packages.hiveeyes.org/hiveeyes/foss/pycom/
You may go for the vanilla flavour.