Connecting to NEO-M8N GPS
-
So eventually I gave up on PyTrack GPS and bought GNSS 5 CLICK dev board from MicroElektronika.
Board information
It has NEO-M8N GPS receiver that has aGPS (Assist GPS) with cold start (Time To First Fix) of about 25 sec. By all means looks like a great device...
My problem is I have no clue how to physically connect it to FiPy. All I know is the range of available pins on FiPy:
[Analog Input Pins on Expansion Board 3.1 that I use for FiPy are P13, P14, P17, P18 (G4, G5, G30, G31)].
For some reason, however, it does not look relevant in that case. The boards has I2C and UART interfaces...So, I'd appreciate if any EE guru can tell me what I need to do to connect this dev board to FiPy...
EDIT Dec 22. 2019:
I found the answer here:
https://docs.pycom.io/firmwareapi/pycom/machine/i2c/
which is P9 is for SDA and P10 is for SCL
Is that correct?EDIT Dec 24, 2019:
However, what is best or more simple - connecting over SCL and SDA pins (I2C) or over SPI/UART ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login