Serial console is not shown
-
Hi!
I have received Gpy board with expansion board 3.1. I update expansion board and pycom GPy. But when I try to do a serial conection the console is now shown. I have try the firmware v1.20.2.rc10 and v1.20.1.r2. But I have always the same result.
When I press the reset button the screen will show the following:
ets Jun 8 2016 00:22:57rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8020,len:8
load:0x3fff8028,len:2140
ho 0 tail 12 room 4
load:0x4009fa00,len:19760
entry 0x400a05bcWhat happen?
Greetings
-
What happens if you start typing python commands into the terminal, even though the
>>>is not shown? It could be caused by the oldmain.pyandboot.pyfiles on the device already running. You can clear the device as well using the firmware updater tool
Gijs -
@Gijs I couldn't typing command and Ctrl+C or Ctrl+D it didn't work. I cleanned the device but it didn't work.
I have just resolved after 6 hours... The problem is that for some reason this GPy dont like pybytes firmware. I installed 1.18.2.r7 and now it's work. This is a shame that I can't install the last version of GPy.
What development board needs so many hours to put it into work?......
I am disappointed with this board. And that this type of thing is not indicated on the web ( it seems to happen to more people this problem)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login