Wipy 3.0 SPI voltages?
-
Im trying to communicate with a MSP430, the output voltage of the MSP430 SPI pins is 3.3V, do I need to adapt these voltages to 1V on Wipy inputs or 3.3V is fine?
Also, can I damage the Wipy if I already connected these 3.3V pins to the Wipy with no protection?
-
@Manuel-Martín said in Wipy 3.0 SPI voltages?:
The digital signal level of the WIPy is 3.3V. So it matches. Only the ADC inputs have a basic range of 0-1V, which can be changed to 0-3.3V. But using the ADC capable pins for digital signals is fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login