Wipy 3.0 SPI voltages?

[Manuel Martín]

Im trying to communicate with a MSP430, the output voltage of the MSP430 SPI pins is 3.3V, do I need to adapt these voltages to 1V on Wipy inputs or 3.3V is fine?

Also, can I damage the Wipy if I already connected these 3.3V pins to the Wipy with no protection?

[robert-hh]

@Manuel-Martín said in Wipy 3.0 SPI voltages?:
The digital signal level of the WIPy is 3.3V. So it matches. Only the ADC inputs have a basic range of 0-1V, which can be changed to 0-3.3V. But using the ADC capable pins for digital signals is fine.