Pycorpm_2.py __init__ 118 line

[Tautvydas Bujauskas]

Hi,

I have fipy and trying to get device make some measurements at regular intervals and if accelerometer movement is detecte it shoud wake up.

going along tutorials in docs, but this error stoped me.

Pycoproc init
Traceback (most recent call last):
  File "main.py", line 22, in <module>
  File "/flash/lib/pycoproc_2.py", line 118, in __init__
KeyboardInterrupt:
Pycom MicroPython 1.20.2.r6 [v1.11-c5a0a97] on 2021-10-28; FiPy with ESP32
Pybytes Version: 1.7.1

code is here

import machine
from machine import Pin
import time
import pycom
from pycoproc_2 import Pycoproc
from LIS2HH12 import LIS2HH12

from rgb import led_blink
from acc import activity_int_handler
from timing import cycles_counter, create_message, clean_msg

pycom.heartbeat(False)

sleep_time = 10 #sleep in seconds
send_cycles = 4
send_cycles_key = "c1"
send_location_cycles = 10
send_location_cyckes_key = "c2"


print("Pycoproc init")
py = Pycoproc()
print("Accelerometer init")
acc = LIS2HH12()

#more code here but i think it is not nessesary.

wake_pins = [Pin('P13', mode=Pin.IN, pull=Pin.PULL_DOWN)]
machine.pin_sleep_wakeup(wake_pins, mode=machine.WAKEUP_ANY_HIGH, enable_pull=True)
print("-----------------------------------")

print("Going to deep sleep for", sleep_time, "s")
py.setup_sleep(sleep_time)
py.go_to_sleep(gps=True, pycom_module_off=True, accelerometer_off=False, wake_interrupt=True)

machine.deepsleep(1000*sleep_time)


print("This will never be printed")

not all code here but, after 2 cycles i get this error, as I understand this is something when board is starting I2C connection again.