FiPy Firmware Update Results in no REPL / serial response
-
After days of issue not being able to get MQTT working, I have attempted firmware updates on my FiPy. I just attempted to put the "Development" firmware back on (however there is no clear instruction I can find on how to do the "PyBytes Registration" so have skipped that).
The latest "feature" is that the board longer has a REPL interface.
I thought the firmware updated had killed the serial interface - but can reset the board and see the serial data output (in different modes as I connect G23 to GND on my Expansion board V2.1A). So it appears the board is no longer responding to serial commands (i.e. I can no longer just hit {Enter} and get a REPL ">>>" prompt any more).
Here's the output (without the G23 GND jumper):
Any assistance to get back to square one (factory default) would annoyingly be a big a step forward. Thanks in advance.
-
@Antman You can always load any firmware of your choice using the pycom downloader. That include the most recent PyBytes firmware versions.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login