OTA firmware upgrade of LoPy
-
Hello everyone,
i was looking around in the documentation and found that Over the air(OTA) was/is possible to do via FTP(https://docs.pycom.io/lopy/lopy/general.html). In the instructions it says you should move the image.bin file but in the new releases there are several bin files. Are they needed to correctly update the firmware? Is it still possible to do this?
Thanks in advance!
-
To be precise, the instructions talks about appimg.bin. That method worked up to a versions 0.9.x, but does not work any more. Pycom promises to re-enable that some time. You will find topics around that, if you search through the board, like here: https://forum.pycom.io/topic/230/ota-firmware-update
-
@robert-hh
Thank you for the answer!
I searched around the forum but its sometimes confusing when then documentation and forums are not synced because of the ever changing updates :)
I'll keep an eye out the in the patch notes.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login