Laggy REPL with disconnects on new firmware

[coagentpai]

Updated two LoPy's today with the firmware updater. They are now using 1.6.8b2. The REPL over WiFi on a LoPy is unstable (disconnects at times) and has high latency. I was able to reproduce this on two units that weren't affected. on 1.6.7b1. The serial console and the program itself are running fine. Using a WPA2 network on CH1. Any advice welcome.

[stef]

@livius
thanks again
Bookmarked ...

Stephane A.

[livius]

@stef
look here
https://forum.pycom.io/topic/517/downgrading-firmware-advanced-users

[stef]

Ok ,
But with the Updater , you have only access to the latest firmware .
Have you a link with all the Lopy Firmware release so far ?

Thanks.

Stéphane A.

[livius]

@coagentpai
Only downgrade or wait for new firmware release.
I have same problems and also I2C bus error problem..