Using ESP-IDF with LoPy.
-
Hello all,
I know that we can use the official ESP-IDF with the LoPy board , but is it reversible ?
Can I use the Pycom Firmware back again to flash the board ?Thank's in advance
Stéphane A. -
@stef Why not? You should erase flash first, and then you'll start over in the factory condition of the esp32. I did not try that with the esp32, but for esp8266 that was never a problem.
-
Hi @stef
Let us know what you encounter. I'm also more comfortable with RTOS and C - for now
Thx,
Martijn -
For the moment , my code is working with ESP-IDF on an ESP32 board , but i need LoRa support . Will try to add the LoRa stack working for the SX1272.
By the way , is there a way to know the ESP framework version used by the LoPy ?
in Python , got no detection from some of my BT beacons ( same problem using 3 LoPy board) , but it's more like its an ESP IDF problem- link
May be it would be solved in futur firmware ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login