LoPy dimensions
-
-
Hi,
Thanks for your answer.
I did look there, but I can't seem to find any dimensions. There are pinouts, datasheets and L01 dimensions, but nothing for LoPy.
mihaela
-
Does anyone know at least the pitch of the pins?
Thanks,
mihaela -
@mihaela Lopy: Two rows of 14 pin, 2.54mm pitch, 17.78 mm apart
-
@mihaela said in LoPy dimensions:
but nothing for LoPy.
maybe this helps?
https://docs.pycom.io/pycom_esp32/_downloads/OEM-baseboard-layout.pdf -
Thank you. It will help me put in the connector sockets.
-
@mihaela
sorry for too fast post - from work
last link was for OEM no lopy dev -
@livius No worries. Thank you for your help.
-
Those links to docs.pycom.io are all dead, but google still links to this thread.
@livius Do you mind updating them or letting us know the new links?
-
@megabyte
look here
https://docs.pycom.io/
and for datasheets
https://docs.pycom.io/chapter/datasheets/ -
If you prefer a 3D model, that is also available, see links below.
.stl: https://www.pycom.io/wp-content/uploads/2017/04/lopy.stlNew.zip
.obj: https://www.pycom.io/wp-content/uploads/2017/06/sipy.obj_.mtl_.zip
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login