Root causes of high deep sleep current [LoPy1, WiPy2 and SiPy], all the new modules **do not have deepsleep issues**
-
@ssmith @constantinos we will make the schematics available later today.
-
@constantinos Hi, I can confirm that we will be releasing the schematic later today. Thanks Fred
-
Hello,
The schematics for the deep sleep shield are now available here: https://docs.pycom.io/pycom_esp32/_downloads/Deep-Sleep-Shield_Schematic.pdf
Cheers,
Daniel -
@daniel Thank you very much. Will you also publish the code for the PIC controller?
-
@robert-hh yes, it will be open source too.
-
What are the dimensions of the 'deep sleep shield'? Will it still fit in a standard housing together with the v1.0 expansion board?
-
@frankb it's going to be around 12mm tall. It's not going to fit inside the Pycase, but it most likely will fit inside the IP67 case. We will confirm this shortly.
-
@daniel any timeline for release of the PIC source? I should have all the parts to build one of these on protoboard so I can continue with a project evaluation, except the code. Even a beta code in a hex file I can program via a PICkit3/ICD3.
-
@Kean I don't have precise timelines yet, we are still busy with the PIC code and we are not ready to share it yet. I should be able to share some more info next week.
-
@daniel Thanks!
-
Dear All,
A quick update on this topic to confirm we are currently testing the Pilot Run samples in Eindhoven. All going well and we expect to have shields to ship circa 2 to 3 weeks e.g. 5/6 June. Photo enclosed of first unit.
Best wishes Fred
-
Hi @Fred, There are any updates about the shields? Thanks
-
When can we expect that the shields will be shipped to us?
-
Firmware and board will be available in early June?
-
@Fred Considering getting a pysense and pysense case. Will this setup work with my Lopy+deep sleep shield?
-
Hi @jomifo,
If you use a Pysense or Pytrack, you do not need to use the deep sleep shield as the Pysense/track already have this feature built in!
-
Unfortunately, the solution to an alternative expansion board is not good for me. I'll have to mount it on an ad hoc card. Question: The OEM Reference Board (https://www.pycom.io/product/oem-reference-board/) + L01 OEM Module (https://www.pycom.io/product/l01/) can solve the problem ? I saw this: https://www.pycom.io/l01-oem-module-deep-sleep-test/. The OEM reference board has the same Lopy pinout?
-
@_peter The only modules affected by the deep sleep issue is the Development versions of the WiPy 2.0, LoPy and SiPy. All of the OEM modules are not affected by this issue as they do not use the same power regulation as found on the affected modules. This includes the OEM Reference Board.
Thanks!
-
@bucknall Thank you, I apologize but I do not find any documentation on the OEM Reference Board. Do you know where to find it?
-
@_peter We currently have the OEM baseboard reference design available here - https://docs.pycom.io/pycom_esp32/pycom_esp32/datasheets.html#oem-baseboard-reference-design
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login