WiPy / SiPy deep sleep interrupt wake
-
I wish to reduce my typical WiPy 2.0 power consumption of ~0.085 A at 5V to much lower.
machine.idle()andmachine.sleep()with interrupt based wakeup do not seem to have any effect on this.machine.deepsleep()never utilises interrupts to wakeup the board. Please advice how to program interrupts in deep sleep mode. -
@helloerror
It is still not supported and also read here about power consumption in old modules
new one are not affected
https://forum.pycom.io/topic/1022/root-causes-of-high-deep-sleep-current/19
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login