I2C accelerometer model MMA7455
-
Correct address for that board (SDO pulled high) is the alternate address: 0x1D
-
@livius Ok, got it.That's an unusual use of CS. The module which is used here has an internal pull-up for CS, as far as I recall.
-
@robert-hh
in documentation isWith CS tied high to VDD I/O, the ADXL345 is in I2C mode
-
@livius CS must be pulled low, to VSS, not high to VDD.
-
@pablocaviglia
It is important how do you connect it. Especially CS pin
And address pin low or high
[59, 60, 61]
mean that you have 3 "devices" with address decimal 59, 60, 61 (3B,3C,3D)