Beacon scan give strange result with LoPy
-
Hi all ,
I'm using the Lopy to scan Ibeacons , but i got very strange result:
(got 5 beacons )
I use Beacon from Kontackt ( based on nRF51822 )
when 2 beacons in range of Lopy , Got to scan up to 20secondes for getting the second one appear
So when scan time is fixed to 2secondes ( short time for battery save ) , lot of miss occur , RSSI value fluctuate from -50 to -90 from two scan ....
And more than that , after 200-250 scan , Lopy stop reporting BT , must be hard reset to get it back....Read somewhere that is a ESP32 problems : BLE does not scan iBeacons
Some of you have success with beacon scan with Lopy ? ( a brand to sugest ? )
-
@stef I've reported the same problems, but in my case I scan continuously, as the LoPy is USB-powered. https://forum.pycom.io/topic/1255/lopy-stops-detecting-ble-advertisements I very much hope it's not a hardware problem.
