Beacon scan give strange result with LoPy
-
Hi all ,
I'm using the Lopy to scan Ibeacons , but i got very strange result:
(got 5 beacons )
I use Beacon from Kontackt ( based on nRF51822 )
when 2 beacons in range of Lopy , Got to scan up to 20secondes for getting the second one appear
So when scan time is fixed to 2secondes ( short time for battery save ) , lot of miss occur , RSSI value fluctuate from -50 to -90 from two scan ....
And more than that , after 200-250 scan , Lopy stop reporting BT , must be hard reset to get it back....Read somewhere that is a ESP32 problems : BLE does not scan iBeacons
Some of you have success with beacon scan with Lopy ? ( a brand to sugest ? ) -
@stef I've reported the same problems, but in my case I scan continuously, as the LoPy is USB-powered. https://forum.pycom.io/topic/1255/lopy-stops-detecting-ble-advertisements I very much hope it's not a hardware problem.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login