Pymakr does not show lopy files in File-Browser

[w0run]

Sadly that did not work either. I created a new project and added boot.py and main.py that I had downloaded using Filezilla. All seemed fine. I modified main.py a little bit and then tried to sync the project. this is what I got:

Connecting to a LoPy...
MicroPython a78d0fa on 2016-10-21; LoPy with ESP32
Type "help()" for more information.

Syncing the project with the LoPy. Please wait...
Syncing failed!

Reattempting in a few seconds...
Connecting to a LoPy...
Error while communicating with the LoPy! (click to attempt to reconnect)

At this point I had to power cycle the LoPy to get it to connect again.

[w0run]

After the sync failure reported previously, I discovered that boot.py was empty (0 bytes). So REPL was not being duplicated on the uart. I restored it with Filezilla and all is well again. So the Pymakr sync function has some problems, at least in Windows 10.
I have tried this a couple of times now, with the same results.

[aureleq]

@w0run have you managed to make it work?
I am trying to upload a source file and I followed the project creation process. When I try to synchronize I have the same sync failed problem...
I tried with both USB and WiFi setup in PyMakr but no success so far

[digsatman]

@aureleq There is a problem with sync at the moment - it is due to be sorted soon as per the thread at https://forum.pycom.io/topic/153/pymark-sync-project-failed

[aureleq]

Thanks for the info!
Is there an alternative way while waiting for a fix? With FileZilla I can download files but upload always times out. Maybe I missed some config though I am in passive mode and 1 simultaneous connection only.

Aurelien

[digsatman]

@aureleq I too have had very little success with filezilla - a trick I did discover was to establish a connection and then put the file(s) I wish to transfer in the "Queued Window" of fiezilla and then click on the "process queue" in the transfer window. When nothing seems to happen, click on the icon that "disconnects from the currently active server" whereupon the files will transfer and the connection then dropped. I've only tried this with small files but it seems to work reliably.

I'm using Filezilla 3.22.1 under WIndows 7 (64 bit). When I was trying to upload new firmware into the flash/sys directory (before the stand-alone updaters were fixed) - I had to resort to using my Android phone and using FTP in an app called "ES File Explorer" - This worked better with large files but was still unreliable but better than filezilla using the same "passive" and single connection you mention.

[w0run]

I have only uploaded once using Filezilla, and it worked okay for me.

[aureleq]

@digsatman thanks it worked for me as well! I just had to do the actions in reverse order (disconnects from server then process queue)

[Shaun]

@Ralph
I too expected to be able to access the file and folder structure of the Lo/WiPy using Pymaker, as I understood I would no longer need any other application to develop with Pycom products.

I would like to be able to retrieve files that have been created by a python script (Eg log files) running on a Pycom product and I would also like to be able upload resource or config files that are separate from a python project.

Thank you.

[Ralph]

Hi @Shaun,

Thanks for the suggestions. The '2 way sync' is something we are discussing to implement. Upload of config or resource files is also not fully supported at the moment, so for now you'll need an FTP app to do this. I'll put this on our list to research. For all development of your python code, pymakr will do the trick.

[pclavier]

This post is deleted!