Pytrack and Pysense firmware release 0.0.2

[livius]

@daniel said in Pytrack and Pysense firmware release 0.0.2:

How to upgrade under Windows?

[joe2612]

Some additional tips to help MAC users:

1. After downloading the Pytrack/Pysense DFU, rename it to firmware_file.dfu
2. Move the DFU file to Library folder
3. Hold the push button and connect the Pytrack/sense ( no LoPY etc needed) over USB
4. release the button and paste the command : dfu-util -D firmware_file.dfu
5. Should be good to go!

[jmarcelino]

@livius
dfu-util is also available for windows http://dfu-util.sourceforge.net/releases/

dfu-util-0.9-win64.zip

Should be really similar to use (from command line)

[Camot]

@jmarcelino said in Pytrack and Pysense firmware release 0.0.2:

@livius
dfu-util is also available for windows http://dfu-util.sourceforge.net/releases/

dfu-util-0.9-win64.zip

Should be really similar to use (from command line)

The pysense is recognised by my Windows 10 as Serial USB device.

However, when I plug it in with the button pressed it says unknown device, no driver available.

Hence the update fails

PS C:\Users\.....\Pycom\dfu-util-0.9-win64> .\dfu-util.exe -D .\pysense_0.0.2.dfu
dfu-util 0.9

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Match vendor ID from file: 04d8
Match product ID from file: f011
Cannot open DFU device 04d8:f011
No DFU capable USB device available

[livius]

@jmarcelino said in Pytrack and Pysense firmware release 0.0.2:
I have tried it before i asked ;-)
But it say unknown vendor for me

I have tried also -s
dfu-util.exe -s COM4 -D pysense_0.0.2.dfu

But have not tried much. In the evening i will try more

[jmarcelino]

@livius
Ha sorry I see Windows needs a DFU driver! No problem, libUSBk to the rescue.

Try installing the driver package I generated:
[now old, see above]

or install libusbK and make your own using the inf-wizard :-)

Once that's done dfu-util -D pysense_0.0.2.dfu will work (remember you only have about 7 seconds to run it after releasing the button, so install the driver first)

DFU-UTIL has to be >= version 0.8
Tested with PyTrack not sure if the PySense uses the same ID, will try it up later.

[daniel]

@jmarcelino thanks for the Windows instructions and the driver package!

[jmarcelino]

PySense and PyTrack DFU use different USB IDs so I generated two driver packages for Windows using libusbK (I don't know how to make a single one...)

PySense: http://metavurt.net/software/drivers/PySense_DFU.zip
PyTrack: http://metavurt.net/software/drivers/PyTrack_DFU.zip

After installing the driver you need download dfu-util for Windows from http://dfu-util.sourceforge.net/releases/dfu-util-0.8-binaries/win32-mingw32/ , I recommend the static compiled binary to avoid any library issues, you only need one executable: dfu-util-static.exe

Place the executable and the dfu firmware from Pycom together and get ready to run:
dfu-util-static.exe -D pysense_0.0.2.dfu or
dfu-util-static.exe -D pytrack_0.0.2.dfu depending on your firmware and board

Then connect the board with the button pressed down, release the button after one second and run the command above - remember you only have 7 seconds to do so!

The process will look like this

[jobbyworld]

@joe2612
on macbook pro :
I advice to specify device since another device is in dfu mode

dfu-util -l
dfu-util 0.7

Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org

Found Runtime: [05ac:8289] devnum=0, cfg=1, intf=3, alt=0, name="UNDEFINED"
Found Runtime: [04d8:f011] devnum=0, cfg=1, intf=0, alt=0, name="UNDEFINED"

so i advice to specify device :

dfu-util --device 04d8:f011 -D pysense_0.0.2.dfu 
dfu-util 0.7

Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org

Filter on vendor = 0x04d8 product = 0xf011
Opening DFU capable USB device... ID 04d8:f011
Run-time device DFU version 0100
Claiming USB DFU Runtime Interface...
Determining device status: state = dfuIDLE, status = 0
WARNING: Runtime device already in DFU state ?!?
Found Runtime: [04d8:f011] devnum=0, cfg=1, intf=0, alt=0, name="UNDEFINED"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0100
Device returned transfer size 64
Dfu suffix version 100
bytes_per_hash=327
Copying data from PC to DFU device
Starting download: [##################################################] finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
```

[jmarcelino]

@jobbyworld
If you update to dfu-util version 0.8 or later it should pick up the correct ids from the file to filter on

[johncaipa]

@jmarcelino thanks for the instructions!
@daniel where can we find examples and libraries?
regards

[livius]

@daniel
for me pysense + wipy2 hangs after few seconds

upgrade was ok

dfu-util-static.exe -D pysense_0.0.2.dfu
dfu-util 0.8

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org

Match vendor ID from file: 04d8
Match product ID from file: f011
Opening DFU capable USB device...
ID 04d8:f011
Run-time device DFU version 0100
Claiming USB DFU Runtime Interface...
Determining device status: state = dfuIDLE, status = 0
WARNING: Runtime device already in DFU state ?!?
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0100
Device returned transfer size 64
Copying data from PC to DFU device
Download        [=========================] 100%        16384 bytes
Download done.
state(2) = dfuIDLE, status(0) = No error condition is present
Done!

wipy2 after fresh

os.mkfs('/flash')

with current firmware 1.7.2.b1 (official build)

i put 6 times os.uname() but only first 2 i get response and then it hang totally
all interfaces go down - wifi and uart
no info on COM/response on any command and no output

rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:12
ho 0 tail 12 room 4
load:0x3fff9020,len:388
load:0x40078000,len:11412
load:0x4009fc00,len:848
entry 0x4009fd9c
MicroPython v1.8.6-650-g9bacbbd4 on 2017-06-09; WiPy with ESP32
Type "help()" for more information.
>>> os.uname()
(sysname='WiPy', nodename='WiPy', release='1.7.2.b1', version='v1.8.6-650-g9bacbbd4 on 2017-06-09', machine='WiPy with ESP32')
>>> os.uname()
(sysname='WiPy', nodename='WiPy', release='1.7.2.b1', version='v1.8.6-650-g9bacbbd4 on 2017-06-09', machine='WiPy with ESP32')
>>> 

i moved this wipy to expansion board and it work without any problem

[daniel]

@livius after it hangs, does it revive by resetting the WiPy 2, or do you have to power cycle the pysense?

[livius]

@daniel
it revive by pressing reset button on Wipy2
and back hang

UPDATE
pytrack is ok only pysense is affected

[jmarcelino]

@livius
No problem here with the Pysense (also upgraded using Windows) and a LoPy (sorry I don't have a WiPy to test)

Not sure how many checks the DFU stuff uses (would think it was reliable since it's a USB.org standard) but maybe try flashing it again?

[jmarcelino]

@livius
Does the Pysense after update appear as a USB serial device using the usbser driver?

[livius]

@jmarcelino said in Pytrack and Pysense firmware release 0.0.2:

Not sure how many checks the DFU stuff uses (would think it was reliable since it's a USB.org standard) but maybe try flashing it again?

I have tried before 5 times before written here
also with different cable on different USB port - no difference
and with really short cable (used for near everythin programing)
e.g. white cable below

Does the Pysense after update appear as a USB serial device using the usbser driver?

yes

[jmarcelino]

@livius
Sorry should have figured you'd have done that already :-)

Not sure what it can be, but if pressing reset works I guess it's the WiPy crashing and not the Pysense shutting it off. Sounds like that was the question Daniel had.

[livius]

@jmarcelino said in Pytrack and Pysense firmware release 0.0.2:

Sorry should have figured you'd have done that already :-)

for us we can assume this always ;-)

[Pajarraco]

@livius @jmarcelino In my case I was obtaining the same error:
dfu-util(-static).exe -D pytrack_0.0.2.dfu
Cannot open DFU device 04d8:f014
No DFU capable USB device available

However, running the same with this option finally flashed the Pytrack!

dfu-util-static.exe --device 04d8:f014 -D pytrack_0.0.2.dfu

Hope that this can help to whom have the same problem!

Edit: I should add that before running that command I installed the driver packages which provided @jmarcelino and it didnt work after several attempts.