Reading data through Uart
-
I am trying to connect my SiPy to an MSP430 through UART but am not receiving anything. I have used an Ardunio to test that it works so i know nothing is wrong on the MSP430 side of things. The code is stuck on the uart.any()<=0 part of the code. My python knowledge isn't great so it may be something simple. I am using pins P5 and P6 as they are not used by the pytracks which i am also using. My code is listed below any help would be appreciated.
-
@chrisi Are not P5 and P6 connected to the Sigfox module?
https://docs.pycom.io/chapter/datasheets/downloads/sipy-pinout.pdf -
Good pickup, I will try and use P10 and P11 unless you recommend anything else?
Edit, it works now thanks for the help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login