Implement your own LoRaWAN Server

[fbt]

Hi, @gas @jmarcelino could you provide some additional details about your implementation with a lorawan server and Lopy devices?. have you used nodes and nanogateways implemented with Lopy devices? i would appreciate a lot. thanks

[chumelnicu]

@jmarcelino Hi ! What kind of lora server do u use ? https://www.loraserver.io/ ?

Thank you !

[jmarcelino]

@chumelnicu
Yes that's the one

[chumelnicu]

@jmarcelino I use tthar server too .. very nice solution .

Have you ever test and https://github.com/gotthardp/lorawan-server . Seems very nice too

Thank you!

[gas]

Hi
in my case :
loraserver + mainflux application
pi +ica card as lora GW 1
matchX as lora GW 2
lopy as GW mono channel

and 3 lopy devices working as nodes (with GPS,Temp/humidity, light , mouvments, logging)

[fbt]

@gas said in Implement your own LoRaWAN Server:

lopy as GW mono channel

Hi @gas , thanks a lot for your answer ... so it is possible to implement, just for integration test purposes, a loraserver, with a single Lopy as mono-channel GW, and a Lopy as LoRa node? (nowadays i only have two lopy, but i would like to test this scenario before thinking about buying some additional devices). thanks a lot. i relally appreciate yor help.

[jmarcelino]

@fbt

Yes, you can use the lorawan nano gateway example

https://github.com/pycom/pycom-libraries/tree/master/examples/lorawan-nano-gateway

but connect to your private LoRa Server instead of TTN

Just change the SERVER defined in config.py to match your private server

[fbt]

Thanks @jmarcelino ... actually i've successfully implemented TTN based lorawan with a lopy acting as nanogateway and a lopy acting as a node. but i would like to ensure that there are no additional hw requirements (but the a pc running ubuntu) o move to Lora Server. in case some of you experts could share a brief tutorial describing the minimal tricks to successfully implement this alternative to TTN, it could be great!. thanks again for your support!

[maamar]

@gas hello Gas,
loraserver and mainflux is installed in your Pi or in your computer
did you use postgres?

thank you in adavnce
Maamar

[sunshixing]

This post is deleted!