New firmware release 0.9.3.b1 and Pymate on the App store

[jobbyworld]

Hello,
Successfull update but be warn
unable to connect Ftp after Update on osx
by ftp commandline (with passive mode)
and cyberduck (with passive mode)

Does anyone have same problem ?

[Xykon]

I did the update and get this on the serial console (Mac addresses and SSID updated):

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:312
load:0x40078000,len:2348
ho 0 tail 12 room 4
load:0x4009f000,len:1364
entry 0x4009f2f8
rtc v112 Sep 26 2016 22:32:10
XTAL 40M
frc2_timer_task_hdl:3ffde558, prio:22, stack:2048
tcpip_task_hdlxxx : 3ffdfd18, prio:18,stack:2048
phy_version: 123, Sep 13 2016, 20:01:58, 0
pp_task_hdl : 3ffee6a4, prio:23, stack:8192
mode : softAP(24:0a:c4:00:xx:xx)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
mode : sta(24:0a:c4:00:xx:xx)
n:7 2, o:6 0, ap:255 255, sta:7 2, prof:6
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0

connected with WIFI-SSID, channel 7
Task watchdog got triggered. The following tasks did not feed the watchdog in time:
Tasks currently running:
CPU 0: MicroPy
Aborting.
Guru Meditation Error: Core   0 panic'ed (Unhandled debug exception)
Register dump:
PC      :  4000bff6  PS      :  00060036  A0      :  80084dec  A1      :  3ffd92a0
A2      :  0000000a  A3      :  0000000a  A4      :  00000004  A5      :  00000000
A6      :  00000000  A7      :  fffffff8  A8      :  00000000  A9      :  3ffd9210
A10     :  00000000  A11     :  3ffde857  A12     :  3ffd91df  A13     :  00000030
A14     :  00000000  A15     :  00060c23  SAR     :  0000001e  EXCCAUSE:  00000001
EXCVADDR:  00000000  LBEG    :  4000c46c  LEND    :  4000c477  LCOUNT  :  00000000
CPU halted.

[Xykon]

I cleared the flash completely and re-flashed... the LoPy is no longer crashing during boot and I can manually connect to my Wifi AP through serial REPL. However FTP isn't working, FileZilla giving the following error:

Status:	Connecting to 192.168.1.24:21...
Status:	Connection established, waiting for welcome message...
Status:	Server does not support non-ASCII characters.
Status:	Logged in
Status:	Retrieving directory listing...
Command:	PWD
Response:	257 /
Command:	TYPE I
Response:	200 
Command:	PASV
Response:	425 
Command:	PORT 192,168,1,25,63,133
Response:	500 PORT/EPRT (Active Mode/Extended Active Mode) is not supported. Use PASV/EPSV instead of this
Error:	Failed to retrieve directory listing

I'm playing Golf tomorrow morning so I'll leave it at that for the night.

[Xykon]

This is the boot.py file I had been using before flashing the latest version:

# boot.py -- run on boot-up
import pycom
import os
import machine
from machine import UART
from network import WLAN
pycom.heartbeat(False)
uart = UART(0, 115200)
os.dupterm(uart)
if machine.reset_cause() != machine.SOFT_RESET:
	wlan= WLAN(mode=WLAN.STA)
	wlan.connect('MYWIFI', auth=(WLAN.WPA2,'MYPWD'), timeout=10000)
	while not wlan.isconnected():
		machine.idle()
	print('WLAN sucessfully connected')

[n0ahg]

Give this a shot tomorrow, cheers for all of the hard work.

Take care
Ray

[brotherdust]

@Xykon & @jobbyworld : Can confirm: FTP = broken for me, too. Tried reformat, tried re-flash. No go.

[brotherdust]

@brotherdust said in New firmware release 0.9.3.b1 and Pymate on the App store:

@Xykon & @jobbyworld : Can confirm: FTP = broken for me, too. Tried reformat, tried re-flash. No go.

Oh yeah, PyMate on iOS doesn't work either. The app says it uploaded the helper libraries to the LoPy, but when I do a directory list, nothing changed. Suspect these issues may be related. Please advise.

[leogaggl]

@Fred Any idea when the Android version will be available ?

[n0ahg]

@leogaggl said in New firmware release 0.9.3.b1 and Pymate on the App store:

@Fred Any idea when the Android version will be available ?

https://www.kickstarter.com/projects/1795343078/lopy-the-lora-wifi-and-bluetooth-iot-development-p/posts/1724137?ref=activity

[Fred]

@leogaggl Hi, we will release the Android version in 2 weeks: 18th November. Best wishes Fred

[swohl]

Any word on the implantation of the RTC in the machine module?

[abilio]

@livius, @brotherdust, @Xykon, @jobbyworld: I confirm there is a bug in the FTP server. It will be fixed in a new release later this weekend.

Recomendation: if your workflow depends on FTP, please skip this version and wait for upcoming news.

[daniel]

Hello,

Sorry about the broken FTP/Telnet. We changed something last minute that somehow was not tested properly. We'll fix it and we'll do another release today.

Cheers,
Daniel

[livius]

And still Pymakr can not connect to WiPy2 by COM port
on COM port monitor i have this after pressing reset button:

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:312
load:0x40078000,len:2348
ho 0 tail 12 room 4
load:0x4009f000,len:1364
entry 0x4009f2f8
rtc v112 Sep 26 2016 22:32:10
XTAL 40M
frc2_timer_task_hdl:3ffdd848, prio:22, stack:2048
tcpip_task_hdlxxx : 3ffdf008, prio:18,stack:2048
phy_version: 123, Sep 13 2016, 20:01:58, 0
pp_task_hdl : 3ffed88c, prio:23, stack:8192
mode : softAP(24:0a:c4:00:a8:bf)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
MicroPython 00c85e6 on 2016-11-04; WiPy with ESP32
Type "help()" for more information.
>>> 

[abilio]

This firmware has been superseded by a new version. Please check:
https://forum.pycom.io/topic/191/new-firmware-release-0-9-3-b2