New firmware release 0.9.3.b1 and Pymate on the App store

[Xykon]

This is the boot.py file I had been using before flashing the latest version:

# boot.py -- run on boot-up
import pycom
import os
import machine
from machine import UART
from network import WLAN
pycom.heartbeat(False)
uart = UART(0, 115200)
os.dupterm(uart)
if machine.reset_cause() != machine.SOFT_RESET:
	wlan= WLAN(mode=WLAN.STA)
	wlan.connect('MYWIFI', auth=(WLAN.WPA2,'MYPWD'), timeout=10000)
	while not wlan.isconnected():
		machine.idle()
	print('WLAN sucessfully connected')

[n0ahg]

Give this a shot tomorrow, cheers for all of the hard work.

Take care
Ray

[brotherdust]

@Xykon & @jobbyworld : Can confirm: FTP = broken for me, too. Tried reformat, tried re-flash. No go.

[brotherdust]

@brotherdust said in New firmware release 0.9.3.b1 and Pymate on the App store:

@Xykon & @jobbyworld : Can confirm: FTP = broken for me, too. Tried reformat, tried re-flash. No go.

Oh yeah, PyMate on iOS doesn't work either. The app says it uploaded the helper libraries to the LoPy, but when I do a directory list, nothing changed. Suspect these issues may be related. Please advise.

[leogaggl]

@Fred Any idea when the Android version will be available ?

[n0ahg]

@leogaggl said in New firmware release 0.9.3.b1 and Pymate on the App store:

@Fred Any idea when the Android version will be available ?

https://www.kickstarter.com/projects/1795343078/lopy-the-lora-wifi-and-bluetooth-iot-development-p/posts/1724137?ref=activity

[Fred]

@leogaggl Hi, we will release the Android version in 2 weeks: 18th November. Best wishes Fred

[swohl]

Any word on the implantation of the RTC in the machine module?

[abilio]

@livius, @brotherdust, @Xykon, @jobbyworld: I confirm there is a bug in the FTP server. It will be fixed in a new release later this weekend.

Recomendation: if your workflow depends on FTP, please skip this version and wait for upcoming news.

[daniel]

Hello,

Sorry about the broken FTP/Telnet. We changed something last minute that somehow was not tested properly. We'll fix it and we'll do another release today.

Cheers,
Daniel

[livius]

And still Pymakr can not connect to WiPy2 by COM port
on COM port monitor i have this after pressing reset button:

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:312
load:0x40078000,len:2348
ho 0 tail 12 room 4
load:0x4009f000,len:1364
entry 0x4009f2f8
rtc v112 Sep 26 2016 22:32:10
XTAL 40M
frc2_timer_task_hdl:3ffdd848, prio:22, stack:2048
tcpip_task_hdlxxx : 3ffdf008, prio:18,stack:2048
phy_version: 123, Sep 13 2016, 20:01:58, 0
pp_task_hdl : 3ffed88c, prio:23, stack:8192
mode : softAP(24:0a:c4:00:a8:bf)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
MicroPython 00c85e6 on 2016-11-04; WiPy with ESP32
Type "help()" for more information.
>>> 

[abilio]

This firmware has been superseded by a new version. Please check:
https://forum.pycom.io/topic/191/new-firmware-release-0-9-3-b2