Simple MQTT Tutorial

[thibault]

Sorry i don't speak very well english, so i hav'nt really understand what you says exactly. But i mean you want data about the different version
I have use the pycom_update_0.9.3.b2 on the lopy. And for the mosquitto the version is 1.3.4-2. I'm begin in the IoT world, and maybe i have too few knowledge in it for understand you. If i have not answer that you wait, feel good about explain another way.

[MrPy]

@thibault My apologies, I was replying to vruizil below.

[vruizvil]

Well, thanks a lot for the comments.
After uppgrade recent firmware, the code works fine connecting mosquitto broker.
But, I can't connect two differents sockets with two differentes brokers at same time.
It needs run .disconnect() function to be abel to use the other one broker.
I don't know the reason....., well, I'am not a python expert.

# Initialize MQTT Client
def settimeout(duration): pass


def t3_publication(topic, msg):
	print (topic, ';', msg)
	pycom.rgbled(0xff00)


UNIQUE_ID = machine.unique_id()
MQTT_BROKER = "192.168.2.220"
MQTT_PORT = 1883
mqtt_client = MQTTClient(UNIQUE_ID, MQTT_BROKER, port=MQTT_PORT)
mqtt_client.settimeout = settimeout
mqtt_client.set_callback(t3_publication)
mqtt_client.connect()

MQTT_BROKER_2 = "test.mosquitto.org"
#MQTT_PORT = 1883
mqtt_client2 = MQTTClient(UNIQUE_ID, MQTT_BROKER_2, port=MQTT_PORT)
mqtt_client2.settimeout = settimeout
mqtt_client2.set_callback(t3_publication)
mqtt_client2.connect()

[MainSheet]

Dummy question,

I have the code on my LoPy working :

from simple import MQTTClient
import  time
def settimeout(duration): pass
client = MQTTClient("MainSheet", "broker.hivemq.com", port=8000)
client.settimeout = settimeout
client.connect()
while True:
    print("Sending ON")
    client.publish("/lights", "ON")
    time.sleep(1)
    print("Sending OFF")
    client.publish("/lights", "OFF")
    time.sleep(1)

output is this

connected with goofy, channel 1
Sending ON
Sending OFF
Sending ON
Sending OFF
Sending ON
Sending OFF
Sending ON
Sending OFF
Sending ON
Sending OFF

Connecting to http://www.hivemq.com/demos/websocket-client/? with Chrome
Host = broker.hivemq.com
ClientID = MainSheet
Port = 8000. ( I tried setting the port to 1883 but then I can't connect to hivemq. I also tried to set the code above to connect to port 8000, however, got an out of range error)
subscribed to /lights

however, the messages never get through to HiveMQ

Steve

[vruizvil]

@MainSheet said in Simple MQTT Tutorial:

broker.hivemq.com

Try client.disconnect(), then client.connect(). Try on firefox, it works fine in my tests, and try another topic (without slash), ie.: "mylopytopic"

[vruizvil]

@vruizvil
For Windows, I use MQTTFX Client. Here the link
http://www.jensd.de/apps/mqttfx/

[gertjanvanhethof]

@MainSheet I'am not able to connect.
What do I wrong?

In my main.py I setup the wifi connection successfully.
I checked that by doing an http get call and I was able to get HTML data from a website. So internet connection is working.

I went to: http://www.hivemq.com/demos/websocket-client/

And created a connection with the following details:

Host: broker.hivemq.com
Port: 8000
ClientID: MyLoPy

I created a subscription and tested some messages. All works.

Then I typed the following commands on my LoPy:

MicroPython v1.8.6-40-gd10463e on 2016-11-25; LoPy with ESP32
Type "help()" for more information.

from umqtt import MQTTClient
def settimeout(duration): pass
...
client = MQTTClient("MyLoPy", "broker.hivemq.com", port=8000)
client.settimeout = settimeout
client.connect()
0xc b'10:12:00:04:4d:51:54:54:04:02:00:00'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "umqtt.py", line 86, in connect
IndexError: bytes index out of range

[vruizvil]

@gertjanvanhethof Hi!, try with machine.reset(), then try your code one more time, you need only one client socket, when you try few times the code, I think the socket doesn't work fine. That is the way to solve the same problem in my tests, but I don't know the reason.

[gertjanvanhethof]

@vruizvil

My code is as following:

import time
import machine
from umqtt import MQTTClient

def settimeout(duration): pass

def connect():
if machine.reset_cause() != machine.SOFT_RESET:
client = MQTTClient("MyLoPy", "broker.mqttdashboard.com", port=8000)
client.settimeout = settimeout
client.connect()
print('Connected MQTT Broker.')
return client

def send(client):
while True:
print("Sending ON")
client.publish("/lopy", "ON")
time.sleep(1)
print("Sending OFF")
client.publish("/lopy", "OFF")
time.sleep(1)

I do a connect() and the result is as following:

client.connect()
0xc b'10:12:00:04:4d:51:54:54:04:02:00:00'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "umqtt.py", line 86, in connect
IndexError: bytes index out of range

Still going wrong. What could be the solution?

[gertjanvanhethof]

@MrPy Are you sure those are you messages? I checked and somebody else was publishing these messages.

[gertjanvanhethof]

I found the error. The port is wrong.
It should be: 1883.
Then connect is working.

[gas]

@vruizvil Hi
I started a mosquitto on my laptop (vm debian) and it is working with the code as it is i updated it a little to make it configurable via config param file (wifi and mqtt)
what error you are getting ?

[gertjanvanhethof]

@gas It's working now. The used port was wrong. Thxs for your help.

[RSK]

MQTTClient is missing in the latest firmware, using the image release on 02/Dec/2016.

Could someone confirm this.

[sakis]

@RSK umqtt is not part of Pycom's firmware or standard micropython. It is an external Python library, so to be able to use it you need to upload it to your device.

The easiest way to do that is using Pymakr. Another way is using plain FTP (https://docs.pycom.io/pycom_esp32/pycom_esp32/general.html#local-file-system-and-ftp-access).

Please read step 2 again and try to follow the instructions. If you have any problems let us know.

[RSK]

@sakis Thanks!

I have downloaded umqtt.simple.py from https://github.com/micropython/micropython-lib and placed it in /flash/simple.py of the LoPy using FTP.

And trying to connect from my LoPy application:

With Hive settings:

But connect fails with error "bytes index out of range":

Please help to resolve.

Thanks & Regards,
Satish Kumar. R.

[RSK]

Sorry the link i provided is incorrect, downloaded from the below link:
https://pypi.python.org/pypi/micropython-umqtt.simple

And the changes done to line number 57 "self.sock.settimeout(self.timeout)"

Thanks & Regards,
Satish Kumar. R.

[sakis]

@RSK Have you tried using port 1883 instead of 8000?

[RSK]

I am trying in Windows, by default http://www.hivemq.com/demos/websocket-client/
give port number 8000.

If i try to change in the browser to 1883 then socket connection fails in websocket client.

[MrPy]

@RSK , Pretty sure you have a port issue. 1883 should work. For some reason Hive MQ isn't accepting requests on 1883 currently. I will search for another public test broker..