LoPy stuck in Station(STA) Mode!

[Devang Sharma]

Hello All,

I have connected my LoPy in Station mode and now it does not expose it's own Wi-Fi SSID(AP) anymore. The issue is much worse because the UART is not working as I cannot sync my programs using it. However, it is getting connected to COM port. REPL also not working. I was syncing my project using LoPy's WiFi which is now stuck in STA mode.

I've tried resetting LoPy as well as Upgrading Firmware(1.10.0.b1) but didn't solve the issue. How can I get my LoPy back to AP mode?

Also, how can I solve the COM port issue? I've also faced one error on my other LoPy which was "Guru Meditation Error"! Is that can be solved?

Thank You,
Devang

[Devang Sharma]

@livius Thanks a lot. Now both of my LoPy works in AP mode.

com port issue is adressed and fix will be released in next firmware @daniel can say when.

I hope it is very soon.

[livius]

@devang-sharma
start in safe boot mode (it disable processing your boot.py and main.py)
https://docs.pycom.io/chapter/toolsandfeatures/bootmodes.html

Also, how can I solve the COM port issue?

com port issue is adressed and fix will be released in next firmware @daniel can say when.