WHat is the deep sleep shield?
-
I can't find any page that explains what the deep shield does?
-
@misterlisty
look here
https://forum.pycom.io/topic/1022/root-causes-of-high-deep-sleep-current/86it is provided for fixing problem with deepsleep current, which was to high.
With new modules like e.g. Wipy3 it is not needed. -
thanks, saw nop ereference on which way the deep shield gets connected. I see a white triangle on the borad..which pin does this align to?
-
@misterlisty
look here
https://docs.pycom.io/chapter/datasheets/boards/deepsleep.htmlTo correctly connect a WiPy 2.0, LoPy or SiPy to the Deep Sleep Shield, align the white triangle on the Shield with the LED of the Pycom Device. Once the Pycome Device is seated onto the Deep Sleep Shield, this can then be connected to the Exapnsion Board.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login