Gpy readiness
-
@jmarcelino
Thanks. When should we expect that to be available? -
@kevin
NB-IoT will be later next month. We're trying to have a test firmware to support all 12 bands as well, but due to lack of certification and calibration procedures that will be for testing only. -
@jmarcelino I tried your method using my expansion board. I know CTS/RTS is working because it's handshaking correctly. When I take my FiPy off of reset, I can see the AT commands coming from the ESP32. However, it's not responding to anything I type into the terminal. Any thoughts on what could be happening here? Thanks!!
-
Hi @brotherdust
I think your TX and RX are swapped if you want to communicate with the modem.
Also explains why you see the ESP32 - in this case you want to emulate it so you should not see it.
Please try swapping th RX/TX and keep the ESP32 in reset.
-
@jmarcelino
/me face-palms
There. are. no. words.Thank you.
-
Is there anyway to get to the LTE TX & RTS pin on the GPy?
Are they available on the pads on bottom side of the PCB?
I'm really tired of recompiling each time I think I have some magic AT command to get the Sequans modem to play ball... -
@redferne Aren't the pins documented? Looks like it to me. If I had a GPy, I would use my expansion board similar to how I did it with the FiPy; just with different pin locations. =)
-
@brotherdust said in Gpy readiness:
@redferne Aren't the pins documented? Looks like it to me. If I had a GPy, I would use my expansion board similar to how I did it with the FiPy; just with different pin locations. =)
Ah, I see now what you are saying. That's a bummer they didn't break it out on any pins. Looks like you'll have to play whack-a-mole for a bit to find those pads!
-
Yeah. On the GPy there's a bunch of pogo pads underneath. I might just start testing them one by one... ;-]
-
Sorry to say but those UART pins are not mapped onto test points or external pins on the GPy. They only connect to the ESP32.
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login