Would somebody have a library for Irrometer Watermark 200ss?
-
Hello,
I am new programming and I am doing a project with Irrometer Watermark 200ss sensor, do you know if this library exist? I am using Lopy.
thank you in advance
Jose Juarez
-
@jclo13
this is analog sensor if you look at library
https://github.com/empierre/arduino/blob/master/SoilMoistSensor.ino
it only set voltage and read analog voltage value. It do this few times and return average value
but this was only fast looking at... -
@livius thank you to answer, I will try it.
-
@jclo13
Two general guidelines has been ignored in the github post, which are sensor & ground isolation and duration of excitation :ā
Sensors must be powered individually, and the ground must be isolated from sensor to sensor. Even if powered individually, an open ground path to another un-powered sensor can't be allowed. This is best accomplished using multiplexers to open and close the appropriate channels.
ā
For additional details please refer to :
www.irrometer.com/200ss.html
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login