FiPy Schematics

[Nazz]

Hello Team,

Can you please share us the schematics of FiPy development board and expansion board.

Thank You

[rskoniec]

@nazz Here click me (scrol down a little) you can see the pictures of testing lab where you can see the pins for these pads. This presents GPy which have different pads placement, but gives you an idea.

[Nazz]

@seb

Ok thank you very much for information.

Thank You

[seb]

@nazz

They are all test pads for use in production

[Nazz]

@seb

Thank you, and the one labeled 13 and below 15 which are for those?

Thank You

[Nazz]

@seb

Thank you, can i know the one labeled 13 and below 15 there are 3 rows total 21pads which are for those?

Thank You

[seb]

@nazz

The ones labeled 14 and 15? These are test points for the cellular modem for use during production.

[robert-hh]

@seb Thanks. I forgot to look into the old WiPy files.

[Nazz]

@seb

Got expansion board schematics but what about my other question??? can you please help me with this,
Wanted to know on the back side of the fipy development module near nano sim slot there are 2-set of pads left over can i know what is for that.

Thank You

[seb]

https://github.com/wipy/wipy/tree/master/hardware/ExpansionBoard-v1.2

[robert-hh]

@seb I found the schematics of the deep sleep shield, but not the one of the expansion board. At least not in the documentation.

[Nazz]

@seb
Hello,
Thank you for your quick response. Can you share the schematics for the expansion board, and also if schematics of pycom modules are not available can you please help me with some information like, i wanted to know on the back side of the fipy development module near nano sim slot there are 2-set of pads left over can i know what is for that.

Thank You

[seb]

Hi,

Pycom does not publish schematics for our modules. Only the expansion board and deep sleep shield have schematics available.