Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    GPy with Hologram.io SIM

    Scheduled Pinned Locked Moved GPy
    hologram.io
    100 Posts 10 Posters 42.8k Views 12 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T Offline
      tlanier @ChrisGammell
      last edited by tlanier

      @chrisgammell

      After seeing the major changes being made on GitHub this morning when I was studying the code, I had decided to just wait until they were published. I setup my laptop and the GPy in my office (where the signal is actually weaker) just to copy the software changes to my desktop. The attach just started working. I don't think I changed anything from yesterday. I had been playing with adding a delay of 2 secs before trying to attach, but that had no affect yesterday. I took the delay out today and it still attached without a problem. Very strange and no we did not swap the antenna. It turns out the antenna I'm using is within specs.

      Is it possible that Hologram did something to activate my account with Verizon? Is it possible that inserting the SIM in an Android phone somehow activated the SIM? I'm not sure why it started working.

      Tomorrow I will post my updated code. I didn't bring it home with me tonight.

      If I have time tomorrow, I'm thinking about trying to duplicate the connect() code in Python to try to see where it fails. Now that I know the source code is on GitHub, that may generate some ideas of how to debug what is going on. All the code is in C/C++, so the question is whether I can duplicate the same thing in Python to troubleshoot the problem. I really haven't looked at it close enough yet.

      There are various places in the C/C++ code where exceptions are thrown for various reasons. I think one of the fundamental problems the programmer has is how long should you wait for the modem to respond to a command before timing out. Once a timeout occurs bad things can happen since the program may then try to talk to the modem with another command and the modem is still processing and returning results for the previous command. You've gotta timeout at some point, but if you do so too soon things get out of sync.

      1 Reply Last reply Reply Quote 0
      • ChrisGammellC Offline
        ChrisGammell
        last edited by

        @tlanier said in GPy with Hologram.io SIM:

        Is it possible that inserting the SIM in an Android phone somehow activated the SIM? I'm not sure why it started working.

        It is possible that the SIM was not seated correctly. Now that I think of it, I should have had you run the AT+CCID command. This ensures that the modem is reading the unique identifier back from the SIM card. Sometimes if there is dirt or a loose SIM holder, this is a possibility. I'm sorry I didn't think to recommend that. Sometimes in an ongoing battle against getting connected, it's good to go through and do a checklist of things. We actually made a video/blog post about just that, after discussing this situation.

        If I have time tomorrow, I'm thinking about trying to duplicate the connect() code in Python to try to see where it fails.

        You mean you'll basically replicate the function that the C++ is doing? Where is this code located?

        T 1 Reply Last reply Reply Quote 0
        • T Offline
          tlanier @ChrisGammell
          last edited by

          @chrisgammell

          Attach/Connect Success!!!

          I've now been able to attach to the tower and connect.

          The program now crashes at either of these two lines:

          s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
          or
          s.send(b"GET / HTTP/1.0\r\n\r\n")

          OSError: -29312 was one error I got

          Unfortunately, somehow the unit is now stuck on the "lte = LTE(carrier="verizon")" line which executes when I restart and it hangs forever. CTRL+C does not abort the program, power down/up does not fix, reloading Visual Studio Code does not fix, reinstalling Pymakr does not fix.

          I don't think my problems in the past were caused by the SIM card not being inserted properly because I think the code throws an exception if it does not detect a SIM plugged in. Unfortunately I can't test that theory now because of the problem above, but I do remember seeing code that checks the SIM.

          Here's a link to the GitHub site where you can view the code.
          GitHub

          The "esp32\mods\modlte.c" is one place to start looking for clues I think. Notice that major changes to this module were made yesterday.

          import pycom
          import socket
          import ssl
          import sys
          import time
          from network import LTE
          
          BLACK = 0x000000
          WHITE = 0xFFFFFF
          RED = 0xFF0000
          GREEN = 0x00FF00
          BLUE = 0x0000FF
          YELLOW = 0xFFFF00
          
          # send AT command to modem and return response as list
          def at(cmd):
              print("modem command: {}".format(cmd))
              r = lte.send_at_cmd(cmd).split('\r\n')
              r = list(filter(None, r))
              print("response={}".format(r))
              return r
          
          def blink(rgb, n):
              for i in range(n):
                  pycom.rgbled(rgb)
                  time.sleep(0.25)
                  pycom.rgbled(BLACK)
                  time.sleep(0.1)
          
          #####################################################################
          print("CAT M1 Test - V0.5 - 4/20/18")
          
          print("disable MicroPython control of LED")
          pycom.heartbeat(False)
          pycom.rgbled(WHITE)
          
          print("instantiate LTE object")
          lte = LTE(carrier="verizon")
          print("delay 4 secs")
          time.sleep(4.0)
          
          if lte.isattached():
              try:
                  print("LTE was already attached, disconnecting...")
                  if lte.isconnected():
                      print("disconnect")
                      lte.disconnect()
              except:
                  print("Exception during disconnect")
              
              try:
                  if lte.isattached():
                      print("detach")
                      lte.dettach()
              except:
                  print("Exception during dettach")
          
              try:
                  print("resetting modem...")
                  lte.reset()
              except:
                  print("Exception during reset")
          
              print("delay 5 secs")
              time.sleep(5.0)
          
          # enable network registration and location information, unsolicited result code
          at('AT+CEREG=2')
          
          # print("full functionality level")
          at('AT+CFUN=1')
          time.sleep(1.0)
          
          # using Hologram SIM
          at('AT+CGDCONT=1,"IP","hologram"')
          
          print("attempt to attach cell modem to base station...")
          # lte.attach()  # do not use attach with custom init for Hologram SIM
          
          at("ATI")
          time.sleep(2.0)
          
          i = 0
          while lte.isattached() == False:
              # get EPS Network Registration Status:
              # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
              # <tac> values:
              # 0 - not registered
              # 1 - registered, home network
              # 2 - not registered, but searching...
              # 3 - registration denied
              # 4 - unknown (out of E-UTRAN coverage)
              # 5 - registered, roaming
              r = at('AT+CEREG?')
              try:
                  r0 = r[0]  # +CREG: 2,<tac>
                  r0x = r0.split(',')     # ['+CREG: 2',<tac>]
                  tac = int(r0x[1])       # 0..5
                  print("tac={}".format(tac))
              except IndexError:
                  tac = 0
                  print("Index Error!!!")
          
              # get signal strength
              # +CSQ: <rssi>,<ber>
              # <rssi>: 0..31, 99-unknown
              r = at('AT+CSQ')
          
              # extended error report
              # r = at('AT+CEER')
              
              # if lte.isattached():
              #    print("Modem attached (isattached() function worked)!!!")
              #    break
          
              # if (tac==1) or (tac==5):
              #    print("Modem attached!!!")
              #    break
          
              i = i + 5
              print("not attached: {} secs".format(i))
          
              if (tac != 0):
                  blink(BLUE, tac)
              else:
                  blink(RED, 1)
          
              time.sleep(5)
          
          at('AT+CEREG?')
          print("connect: start a data session and obtain an IP address")
          lte.connect(cid=3)
          i = 0
          while not lte.isconnected():
              i = i + 1
              print("not connected: {}".format(i))
              blink(GREEN, 1)
              time.sleep(1.0)
          
          print("connected!!!")
          pycom.rgbled(BLUE)
          
          s = socket.socket()
          s = ssl.wrap_socket(s)
          s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
          s.send(b"GET / HTTP/1.0\r\n\r\n")
          print(s.recv(4096))
          s.close()
          
          lte.disconnect()
          lte.dettach()
          
          # end of test, Red LED
          print("end of test")
          
          while True:
              blink(YELLOW,1)
              time.sleep(1.0)
          
          
          1 Reply Last reply Reply Quote 0
          • T Offline
            tlanier
            last edited by

            I now have control of the GPy again. Word to the wise. Do NOT execute "sys.stdin.read()" to try to clear the keyboard input because it will lock the system.

            1 Reply Last reply Reply Quote 0
            • ChrisGammellC Offline
              ChrisGammell
              last edited by

              @tlanier said in GPy with Hologram.io SIM:

              Attach/Connect Success!!!

              Awesome!

              I verified it's working on mine as well, thank you for sharing the code

              0_1524238255161_Screenshot 2018-04-20 10.28.56.png

              T N 2 Replies Last reply Reply Quote 0
              • T Offline
                tlanier @ChrisGammell
                last edited by

                @chrisgammell

                Were you able to download data from google or did it crash?

                I'm waiting my mandatory 180 secs to post on the forum again. There's got to be a better way to prevent SPAM.

                ChrisGammellC 1 Reply Last reply Reply Quote 1
                • ChrisGammellC Offline
                  ChrisGammell @tlanier
                  last edited by

                  @tlanier Could you define "Crash"? Like did the REPL return? No, it's still stuck at the "end of test" message like in that image. But if I CTRL+C, I'm able to escape to the REPL.

                  T 1 Reply Last reply Reply Quote 0
                  • T Offline
                    tlanier @ChrisGammell
                    last edited by

                    @chrisgammell

                    It WORKED!!!

                    The problem I'm having now is after I run the program once successfully the program will hang in the "lte=LTE(carrier="verizon") line at the start of the program. Unfortunately you can't reset the modem without instantiating the LTE object and instantiating the object is what gets hung up. There needs to be some command to say let's start all over and reset everything.

                    T 1 Reply Last reply Reply Quote 0
                    • T Offline
                      tlanier @tlanier
                      last edited by

                      @tlanier

                      The program is now connecting to google.com successfully. I'm still having trouble with the unit locking up on the LTE(carrier="verizon") line at times. The chip/development environment gets in a crazy mode where I have to reset/power down/restart Visual Studio Code in unknown combinations to regain control of the chip.

                      The Hologram.io dashboard is TERRIFIC!!! You can see data usage and the actual data that passes across the network. I love it!!!

                      import pycom
                      import socket
                      import ssl
                      import sys
                      import time
                      from network import LTE
                      
                      BLACK = 0x000000
                      WHITE = 0xFFFFFF
                      RED = 0xFF0000
                      GREEN = 0x00FF00
                      BLUE = 0x0000FF
                      YELLOW = 0xFFFF00
                      
                      # send AT command to modem and return response as list
                      def at(cmd):
                          print("modem command: {}".format(cmd))
                          r = lte.send_at_cmd(cmd).split('\r\n')
                          r = list(filter(None, r))
                          print("response={}".format(r))
                          return r
                      
                      def blink(rgb, n):
                          for i in range(n):
                              pycom.rgbled(rgb)
                              time.sleep(0.25)
                              pycom.rgbled(BLACK)
                              time.sleep(0.1)
                      
                      #####################################################################
                      print("CAT M1 Test - V0.6 - 4/20/18")
                      
                      # input("")
                      # r = input("Enter anything to abort...")  # allow opportunity to stop program
                      # if r != "":
                      #    sys.exit(0)
                      
                      print("disable MicroPython control of LED")
                      pycom.heartbeat(False)
                      pycom.rgbled(WHITE)
                      
                      print("instantiate LTE object")
                      lte = LTE(carrier="verizon")
                      print("delay 4 secs")
                      time.sleep(4.0)
                      
                      print("reset modem")
                      try:
                          lte.reset()
                      except:
                          print("Exception during reset")
                          
                      print("delay 5 secs")
                      time.sleep(5.0)
                      
                      if lte.isattached():
                          try:
                              print("LTE was already attached, disconnecting...")
                              if lte.isconnected():
                                  print("disconnect")
                                  lte.disconnect()
                          except:
                              print("Exception during disconnect")
                          
                          try:
                              if lte.isattached():
                                  print("detach")
                                  lte.dettach()
                          except:
                              print("Exception during dettach")
                      
                          try:
                              print("resetting modem...")
                              lte.reset()
                          except:
                              print("Exception during reset")
                      
                          print("delay 5 secs")
                          time.sleep(5.0)
                      
                      # enable network registration and location information, unsolicited result code
                      at('AT+CEREG=2')
                      
                      # print("full functionality level")
                      at('AT+CFUN=1')
                      time.sleep(1.0)
                      
                      # using Hologram SIM
                      at('AT+CGDCONT=1,"IP","hologram"')
                      
                      print("attempt to attach cell modem to base station...")
                      # lte.attach()  # do not use attach with custom init for Hologram SIM
                      
                      at("ATI")
                      time.sleep(2.0)
                      
                      i = 0
                      while lte.isattached() == False:
                          # get EPS Network Registration Status:
                          # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
                          # <tac> values:
                          # 0 - not registered
                          # 1 - registered, home network
                          # 2 - not registered, but searching...
                          # 3 - registration denied
                          # 4 - unknown (out of E-UTRAN coverage)
                          # 5 - registered, roaming
                          r = at('AT+CEREG?')
                          try:
                              r0 = r[0]  # +CREG: 2,<tac>
                              r0x = r0.split(',')     # ['+CREG: 2',<tac>]
                              tac = int(r0x[1])       # 0..5
                              print("tac={}".format(tac))
                          except IndexError:
                              tac = 0
                              print("Index Error!!!")
                      
                          # get signal strength
                          # +CSQ: <rssi>,<ber>
                          # <rssi>: 0..31, 99-unknown
                          r = at('AT+CSQ')
                      
                          # extended error report
                          # r = at('AT+CEER')
                          
                          # if lte.isattached():
                          #    print("Modem attached (isattached() function worked)!!!")
                          #    break
                      
                          # if (tac==1) or (tac==5):
                          #    print("Modem attached!!!")
                          #    break
                      
                          i = i + 5
                          print("not attached: {} secs".format(i))
                      
                          if (tac != 0):
                              blink(BLUE, tac)
                          else:
                              blink(RED, 5)
                      
                          time.sleep(2)
                      
                      at('AT+CEREG?')
                      print("connect: start a data session and obtain an IP address")
                      lte.connect(cid=3)
                      i = 0
                      while not lte.isconnected():
                          i = i + 1
                          print("not connected: {}".format(i))
                          blink(GREEN, 1)
                          time.sleep(1.0)
                      
                      print("connected!!!")
                      pycom.rgbled(BLUE)
                      
                      s = socket.socket()
                      s = ssl.wrap_socket(s)
                      print("get www.google.com address")
                      addr = socket.getaddrinfo('www.google.com', 443)
                      print(addr)
                      print("connect to {}".format(addr[0][-1]))
                      s.connect(addr[0][-1])
                      print("GET 50 bytes from google")
                      s.send(b"GET / HTTP/1.0\r\n\r\n")
                      print(s.recv(50))   # receive 50 bytes
                      print("close socket")
                      s.close()
                      
                      try:
                          lte.disconnect()
                      except:
                          print("Exception during disconnect")
                      
                      try:
                          lte.dettach()
                      except:
                          print("Exception during dettach")
                      
                      # end of test, Red LED
                      print("end of test")
                      
                      while True:
                          blink(GREEN,5)
                          time.sleep(1.0)
                      
                      
                      T 1 Reply Last reply Reply Quote 0
                      • T Offline
                        tealbrains @tlanier
                        last edited by

                        @tlanier I have made the same observation about the unit locking up, I am using the WDT to take care of that, hoping that they will solve the issue in the near future. It does not happen that often, see my other post : https://forum.pycom.io/topic/3073/lte-analysis-of-connectivity . Glad to see you got it working in the end!

                        1 Reply Last reply Reply Quote 0
                        • N Offline
                          nathanh @ChrisGammell
                          last edited by nathanh

                          @chrisgammell said in GPy with Hologram.io SIM:

                          I verified it's working on mine as well, thank you for sharing the code

                          Out of curiosity, did you rebuild your firmware from the changes just made to the code on Github?

                          T 1 Reply Last reply Reply Quote 0
                          • T Offline
                            tlanier @nathanh
                            last edited by

                            @nathanh

                            Question: did you rebuild your firmware from the changes just made to the code on Github?

                            No, that's why I asked the questions:

                            • When can the next update be expected?

                            • How will we be notified that the update is available (the web site just has a link to the update program with no version number displayed)?

                            1 Reply Last reply Reply Quote 0
                            • R Offline
                              RWall
                              last edited by

                              Has there been any additional progress on this issue?

                              If not, is it possibly due to carrier="verizon" and using a hologram SIM effectively being mutually exclusive (emphasis on “effectively”).

                              My understanding is that the carrier assignment optimizes the modem configuration for operation on a specific cellular network (Verizon in this case). However, operating on the Verizon network as a Verizon customer vs operating on their network through a MVNO may be very different. The most obvious is being on a home network vs roaming. In addition to functional implications, are there additional constraints based on Hologram’s contractual relationship with Verizon that may be playing a role in this issue? If I recall correctly from an old Hologram discussion, network operators like Verizon impose constraints on VMNO users such as requiring different timeouts on data connections.

                              ChrisGammellC T 2 Replies Last reply Reply Quote 0
                              • ChrisGammellC Offline
                                ChrisGammell @RWall
                                last edited by

                                @rwall If it requires that we do something other than set the APN, I assume that the development process baked in some special magic to get around some restriction on the Verizon side of things (understandable if it was due to the relatively new Sequans chipset). I would be curious if any other SIMs have been tried other than ours and Verizon's. For now, I'm left at the same stage as others of "waiting for updates from the LTE team".

                                I had missed Nathan's question about rebuilding the firmware. I did not, I simply used the latest block of code that tlanier had posted. I verified it connected to the Verizon tower and to our cloud and then got pulled away onto something else.

                                Fun new feature on our dashboard, you can see live usage data and tower location for pro plan stuff.

                                1 Reply Last reply Reply Quote 0
                                • T Offline
                                  tlanier @RWall
                                  last edited by

                                  @rwall

                                  Last weekend I drove the device from LaGrange, GA to Fairhope, AL (about 270 miles) . During the trip I spot checked CAT M1 connectivity. It worked everywhere except when I reached Fairhope where it did not work even though I had 3-4 bars on my cell phone (which also uses Verizon). We are still looking for a coverage map from the carrier detailing where CAT M1 coverage should be expected.

                                  1 Reply Last reply Reply Quote 1
                                  • R Offline
                                    RWall
                                    last edited by

                                    @tlanier, thanks for the update. Do the results from your road trip mean that your system is no longer locking up on the LTE(carrier="verizon") line? If yes, can you share how it was resolved?

                                    T 1 Reply Last reply Reply Quote 0
                                    • T Offline
                                      tlanier @RWall
                                      last edited by

                                      @rwall

                                      I did not experience any lock ups during the trip. Basically I would occasionally plug the unit into the car's USB port and run the test program posted on 4/20/18. I experienced the lock ups when developing the test program trying to find something that would work. I think the exception handling code added helped. As soon as we determine that coverage is good enough, I will do more extensive programming with the unit. Also I was hoping to get some feedback as to when the code changes to the cell connectivity code made on GitHub would be available for download and testing.

                                      1 Reply Last reply Reply Quote 0
                                      • W Offline
                                        wgtthompson
                                        last edited by wgtthompson

                                        The example (dated 4/20/2018) works for me when the modem connects to an AT&T service. It never works if the modem decides to connect to a Verizon service. I am using a GPy and a Hologram SIM.

                                        I can tell which service because the Hologram dashboard shows the service for a specific session.

                                        For AT&T, the modem waits to attach for about 10-20 sec. While waiting to attach, the signal quality starts at +CSQ: 99,99 (RSSI known) and transitions to +CSQ: 20,99 (RSSi known). The registration state starts at +CEREG: 2,0 and changes to +CEREG: 2,2. The modem then transitions to attached, then connects, and works like a charm.

                                        For Verizon, the modem never attaches (I let it loop for an hour once). While waiting to attach, the signal quality will oscillate between +CSQ: 99,99 (RSSI unknown) to +CSQ: 20,99 (RSSi known) roughly ever loop. The registration state starts at +CEREG: 2,0 and then changes to +CEREG: 2,4

                                        Anybody got thoughts?

                                        Note: the example I used has date 4/20/2018 in the code and is posted by @tlanier. I did not use the 4/15/2018 version in his/her original post.

                                        T 1 Reply Last reply Reply Quote 0
                                        • T Offline
                                          tlanier @wgtthompson
                                          last edited by

                                          @wgtthompson

                                          To get the program to work, I had to set the carrier to "verizon" in the LTE function call

                                          lte = LTE(carrier="verizon")

                                          Hologram states that their SIM works with multiple carriers. I don't understand how that works if I'm having to specify the carrier in the initialization.

                                          We need Pycom and Hologram to clarify what is the correct method to initialize the LTE object and what carriers can we expect to connect to.

                                          W 1 Reply Last reply Reply Quote 0
                                          • W Offline
                                            wgtthompson @tlanier
                                            last edited by

                                            @tlanier Yes, I used lte = LTE(carrier='verizon') and can only connect to the local AT&T service.

                                            1 Reply Last reply Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 2 / 5
                                            • First post
                                              Last post

                                            Pycom on Twitter

                                            Pycom