Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    GPy with Hologram.io SIM

    Scheduled Pinned Locked Moved GPy
    hologram.io
    100 Posts 10 Posters 42.8k Views 12 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T Offline
      tlanier @ChrisGammell
      last edited by

      @chrisgammell

      Attach/Connect Success!!!

      I've now been able to attach to the tower and connect.

      The program now crashes at either of these two lines:

      s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
      or
      s.send(b"GET / HTTP/1.0\r\n\r\n")

      OSError: -29312 was one error I got

      Unfortunately, somehow the unit is now stuck on the "lte = LTE(carrier="verizon")" line which executes when I restart and it hangs forever. CTRL+C does not abort the program, power down/up does not fix, reloading Visual Studio Code does not fix, reinstalling Pymakr does not fix.

      I don't think my problems in the past were caused by the SIM card not being inserted properly because I think the code throws an exception if it does not detect a SIM plugged in. Unfortunately I can't test that theory now because of the problem above, but I do remember seeing code that checks the SIM.

      Here's a link to the GitHub site where you can view the code.
      GitHub

      The "esp32\mods\modlte.c" is one place to start looking for clues I think. Notice that major changes to this module were made yesterday.

      import pycom
      import socket
      import ssl
      import sys
      import time
      from network import LTE
      
      BLACK = 0x000000
      WHITE = 0xFFFFFF
      RED = 0xFF0000
      GREEN = 0x00FF00
      BLUE = 0x0000FF
      YELLOW = 0xFFFF00
      
      # send AT command to modem and return response as list
      def at(cmd):
          print("modem command: {}".format(cmd))
          r = lte.send_at_cmd(cmd).split('\r\n')
          r = list(filter(None, r))
          print("response={}".format(r))
          return r
      
      def blink(rgb, n):
          for i in range(n):
              pycom.rgbled(rgb)
              time.sleep(0.25)
              pycom.rgbled(BLACK)
              time.sleep(0.1)
      
      #####################################################################
      print("CAT M1 Test - V0.5 - 4/20/18")
      
      print("disable MicroPython control of LED")
      pycom.heartbeat(False)
      pycom.rgbled(WHITE)
      
      print("instantiate LTE object")
      lte = LTE(carrier="verizon")
      print("delay 4 secs")
      time.sleep(4.0)
      
      if lte.isattached():
          try:
              print("LTE was already attached, disconnecting...")
              if lte.isconnected():
                  print("disconnect")
                  lte.disconnect()
          except:
              print("Exception during disconnect")
          
          try:
              if lte.isattached():
                  print("detach")
                  lte.dettach()
          except:
              print("Exception during dettach")
      
          try:
              print("resetting modem...")
              lte.reset()
          except:
              print("Exception during reset")
      
          print("delay 5 secs")
          time.sleep(5.0)
      
      # enable network registration and location information, unsolicited result code
      at('AT+CEREG=2')
      
      # print("full functionality level")
      at('AT+CFUN=1')
      time.sleep(1.0)
      
      # using Hologram SIM
      at('AT+CGDCONT=1,"IP","hologram"')
      
      print("attempt to attach cell modem to base station...")
      # lte.attach()  # do not use attach with custom init for Hologram SIM
      
      at("ATI")
      time.sleep(2.0)
      
      i = 0
      while lte.isattached() == False:
          # get EPS Network Registration Status:
          # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
          # <tac> values:
          # 0 - not registered
          # 1 - registered, home network
          # 2 - not registered, but searching...
          # 3 - registration denied
          # 4 - unknown (out of E-UTRAN coverage)
          # 5 - registered, roaming
          r = at('AT+CEREG?')
          try:
              r0 = r[0]  # +CREG: 2,<tac>
              r0x = r0.split(',')     # ['+CREG: 2',<tac>]
              tac = int(r0x[1])       # 0..5
              print("tac={}".format(tac))
          except IndexError:
              tac = 0
              print("Index Error!!!")
      
          # get signal strength
          # +CSQ: <rssi>,<ber>
          # <rssi>: 0..31, 99-unknown
          r = at('AT+CSQ')
      
          # extended error report
          # r = at('AT+CEER')
          
          # if lte.isattached():
          #    print("Modem attached (isattached() function worked)!!!")
          #    break
      
          # if (tac==1) or (tac==5):
          #    print("Modem attached!!!")
          #    break
      
          i = i + 5
          print("not attached: {} secs".format(i))
      
          if (tac != 0):
              blink(BLUE, tac)
          else:
              blink(RED, 1)
      
          time.sleep(5)
      
      at('AT+CEREG?')
      print("connect: start a data session and obtain an IP address")
      lte.connect(cid=3)
      i = 0
      while not lte.isconnected():
          i = i + 1
          print("not connected: {}".format(i))
          blink(GREEN, 1)
          time.sleep(1.0)
      
      print("connected!!!")
      pycom.rgbled(BLUE)
      
      s = socket.socket()
      s = ssl.wrap_socket(s)
      s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
      s.send(b"GET / HTTP/1.0\r\n\r\n")
      print(s.recv(4096))
      s.close()
      
      lte.disconnect()
      lte.dettach()
      
      # end of test, Red LED
      print("end of test")
      
      while True:
          blink(YELLOW,1)
          time.sleep(1.0)
      
      
      1 Reply Last reply Reply Quote 0
      • T Offline
        tlanier
        last edited by

        I now have control of the GPy again. Word to the wise. Do NOT execute "sys.stdin.read()" to try to clear the keyboard input because it will lock the system.

        1 Reply Last reply Reply Quote 0
        • ChrisGammellC Offline
          ChrisGammell
          last edited by

          @tlanier said in GPy with Hologram.io SIM:

          Attach/Connect Success!!!

          Awesome!

          I verified it's working on mine as well, thank you for sharing the code

          0_1524238255161_Screenshot 2018-04-20 10.28.56.png

          T N 2 Replies Last reply Reply Quote 0
          • T Offline
            tlanier @ChrisGammell
            last edited by

            @chrisgammell

            Were you able to download data from google or did it crash?

            I'm waiting my mandatory 180 secs to post on the forum again. There's got to be a better way to prevent SPAM.

            ChrisGammellC 1 Reply Last reply Reply Quote 1
            • ChrisGammellC Offline
              ChrisGammell @tlanier
              last edited by

              @tlanier Could you define "Crash"? Like did the REPL return? No, it's still stuck at the "end of test" message like in that image. But if I CTRL+C, I'm able to escape to the REPL.

              T 1 Reply Last reply Reply Quote 0
              • T Offline
                tlanier @ChrisGammell
                last edited by

                @chrisgammell

                It WORKED!!!

                The problem I'm having now is after I run the program once successfully the program will hang in the "lte=LTE(carrier="verizon") line at the start of the program. Unfortunately you can't reset the modem without instantiating the LTE object and instantiating the object is what gets hung up. There needs to be some command to say let's start all over and reset everything.

                T 1 Reply Last reply Reply Quote 0
                • T Offline
                  tlanier @tlanier
                  last edited by

                  @tlanier

                  The program is now connecting to google.com successfully. I'm still having trouble with the unit locking up on the LTE(carrier="verizon") line at times. The chip/development environment gets in a crazy mode where I have to reset/power down/restart Visual Studio Code in unknown combinations to regain control of the chip.

                  The Hologram.io dashboard is TERRIFIC!!! You can see data usage and the actual data that passes across the network. I love it!!!

                  import pycom
                  import socket
                  import ssl
                  import sys
                  import time
                  from network import LTE
                  
                  BLACK = 0x000000
                  WHITE = 0xFFFFFF
                  RED = 0xFF0000
                  GREEN = 0x00FF00
                  BLUE = 0x0000FF
                  YELLOW = 0xFFFF00
                  
                  # send AT command to modem and return response as list
                  def at(cmd):
                      print("modem command: {}".format(cmd))
                      r = lte.send_at_cmd(cmd).split('\r\n')
                      r = list(filter(None, r))
                      print("response={}".format(r))
                      return r
                  
                  def blink(rgb, n):
                      for i in range(n):
                          pycom.rgbled(rgb)
                          time.sleep(0.25)
                          pycom.rgbled(BLACK)
                          time.sleep(0.1)
                  
                  #####################################################################
                  print("CAT M1 Test - V0.6 - 4/20/18")
                  
                  # input("")
                  # r = input("Enter anything to abort...")  # allow opportunity to stop program
                  # if r != "":
                  #    sys.exit(0)
                  
                  print("disable MicroPython control of LED")
                  pycom.heartbeat(False)
                  pycom.rgbled(WHITE)
                  
                  print("instantiate LTE object")
                  lte = LTE(carrier="verizon")
                  print("delay 4 secs")
                  time.sleep(4.0)
                  
                  print("reset modem")
                  try:
                      lte.reset()
                  except:
                      print("Exception during reset")
                      
                  print("delay 5 secs")
                  time.sleep(5.0)
                  
                  if lte.isattached():
                      try:
                          print("LTE was already attached, disconnecting...")
                          if lte.isconnected():
                              print("disconnect")
                              lte.disconnect()
                      except:
                          print("Exception during disconnect")
                      
                      try:
                          if lte.isattached():
                              print("detach")
                              lte.dettach()
                      except:
                          print("Exception during dettach")
                  
                      try:
                          print("resetting modem...")
                          lte.reset()
                      except:
                          print("Exception during reset")
                  
                      print("delay 5 secs")
                      time.sleep(5.0)
                  
                  # enable network registration and location information, unsolicited result code
                  at('AT+CEREG=2')
                  
                  # print("full functionality level")
                  at('AT+CFUN=1')
                  time.sleep(1.0)
                  
                  # using Hologram SIM
                  at('AT+CGDCONT=1,"IP","hologram"')
                  
                  print("attempt to attach cell modem to base station...")
                  # lte.attach()  # do not use attach with custom init for Hologram SIM
                  
                  at("ATI")
                  time.sleep(2.0)
                  
                  i = 0
                  while lte.isattached() == False:
                      # get EPS Network Registration Status:
                      # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
                      # <tac> values:
                      # 0 - not registered
                      # 1 - registered, home network
                      # 2 - not registered, but searching...
                      # 3 - registration denied
                      # 4 - unknown (out of E-UTRAN coverage)
                      # 5 - registered, roaming
                      r = at('AT+CEREG?')
                      try:
                          r0 = r[0]  # +CREG: 2,<tac>
                          r0x = r0.split(',')     # ['+CREG: 2',<tac>]
                          tac = int(r0x[1])       # 0..5
                          print("tac={}".format(tac))
                      except IndexError:
                          tac = 0
                          print("Index Error!!!")
                  
                      # get signal strength
                      # +CSQ: <rssi>,<ber>
                      # <rssi>: 0..31, 99-unknown
                      r = at('AT+CSQ')
                  
                      # extended error report
                      # r = at('AT+CEER')
                      
                      # if lte.isattached():
                      #    print("Modem attached (isattached() function worked)!!!")
                      #    break
                  
                      # if (tac==1) or (tac==5):
                      #    print("Modem attached!!!")
                      #    break
                  
                      i = i + 5
                      print("not attached: {} secs".format(i))
                  
                      if (tac != 0):
                          blink(BLUE, tac)
                      else:
                          blink(RED, 5)
                  
                      time.sleep(2)
                  
                  at('AT+CEREG?')
                  print("connect: start a data session and obtain an IP address")
                  lte.connect(cid=3)
                  i = 0
                  while not lte.isconnected():
                      i = i + 1
                      print("not connected: {}".format(i))
                      blink(GREEN, 1)
                      time.sleep(1.0)
                  
                  print("connected!!!")
                  pycom.rgbled(BLUE)
                  
                  s = socket.socket()
                  s = ssl.wrap_socket(s)
                  print("get www.google.com address")
                  addr = socket.getaddrinfo('www.google.com', 443)
                  print(addr)
                  print("connect to {}".format(addr[0][-1]))
                  s.connect(addr[0][-1])
                  print("GET 50 bytes from google")
                  s.send(b"GET / HTTP/1.0\r\n\r\n")
                  print(s.recv(50))   # receive 50 bytes
                  print("close socket")
                  s.close()
                  
                  try:
                      lte.disconnect()
                  except:
                      print("Exception during disconnect")
                  
                  try:
                      lte.dettach()
                  except:
                      print("Exception during dettach")
                  
                  # end of test, Red LED
                  print("end of test")
                  
                  while True:
                      blink(GREEN,5)
                      time.sleep(1.0)
                  
                  
                  T 1 Reply Last reply Reply Quote 0
                  • T Offline
                    tealbrains @tlanier
                    last edited by

                    @tlanier I have made the same observation about the unit locking up, I am using the WDT to take care of that, hoping that they will solve the issue in the near future. It does not happen that often, see my other post : https://forum.pycom.io/topic/3073/lte-analysis-of-connectivity . Glad to see you got it working in the end!

                    1 Reply Last reply Reply Quote 0
                    • N Offline
                      nathanh @ChrisGammell
                      last edited by nathanh

                      @chrisgammell said in GPy with Hologram.io SIM:

                      I verified it's working on mine as well, thank you for sharing the code

                      Out of curiosity, did you rebuild your firmware from the changes just made to the code on Github?

                      T 1 Reply Last reply Reply Quote 0
                      • T Offline
                        tlanier @nathanh
                        last edited by

                        @nathanh

                        Question: did you rebuild your firmware from the changes just made to the code on Github?

                        No, that's why I asked the questions:

                        • When can the next update be expected?

                        • How will we be notified that the update is available (the web site just has a link to the update program with no version number displayed)?

                        1 Reply Last reply Reply Quote 0
                        • R Offline
                          RWall
                          last edited by

                          Has there been any additional progress on this issue?

                          If not, is it possibly due to carrier="verizon" and using a hologram SIM effectively being mutually exclusive (emphasis on “effectively”).

                          My understanding is that the carrier assignment optimizes the modem configuration for operation on a specific cellular network (Verizon in this case). However, operating on the Verizon network as a Verizon customer vs operating on their network through a MVNO may be very different. The most obvious is being on a home network vs roaming. In addition to functional implications, are there additional constraints based on Hologram’s contractual relationship with Verizon that may be playing a role in this issue? If I recall correctly from an old Hologram discussion, network operators like Verizon impose constraints on VMNO users such as requiring different timeouts on data connections.

                          ChrisGammellC T 2 Replies Last reply Reply Quote 0
                          • ChrisGammellC Offline
                            ChrisGammell @RWall
                            last edited by

                            @rwall If it requires that we do something other than set the APN, I assume that the development process baked in some special magic to get around some restriction on the Verizon side of things (understandable if it was due to the relatively new Sequans chipset). I would be curious if any other SIMs have been tried other than ours and Verizon's. For now, I'm left at the same stage as others of "waiting for updates from the LTE team".

                            I had missed Nathan's question about rebuilding the firmware. I did not, I simply used the latest block of code that tlanier had posted. I verified it connected to the Verizon tower and to our cloud and then got pulled away onto something else.

                            Fun new feature on our dashboard, you can see live usage data and tower location for pro plan stuff.

                            1 Reply Last reply Reply Quote 0
                            • T Offline
                              tlanier @RWall
                              last edited by

                              @rwall

                              Last weekend I drove the device from LaGrange, GA to Fairhope, AL (about 270 miles) . During the trip I spot checked CAT M1 connectivity. It worked everywhere except when I reached Fairhope where it did not work even though I had 3-4 bars on my cell phone (which also uses Verizon). We are still looking for a coverage map from the carrier detailing where CAT M1 coverage should be expected.

                              1 Reply Last reply Reply Quote 1
                              • R Offline
                                RWall
                                last edited by

                                @tlanier, thanks for the update. Do the results from your road trip mean that your system is no longer locking up on the LTE(carrier="verizon") line? If yes, can you share how it was resolved?

                                T 1 Reply Last reply Reply Quote 0
                                • T Offline
                                  tlanier @RWall
                                  last edited by

                                  @rwall

                                  I did not experience any lock ups during the trip. Basically I would occasionally plug the unit into the car's USB port and run the test program posted on 4/20/18. I experienced the lock ups when developing the test program trying to find something that would work. I think the exception handling code added helped. As soon as we determine that coverage is good enough, I will do more extensive programming with the unit. Also I was hoping to get some feedback as to when the code changes to the cell connectivity code made on GitHub would be available for download and testing.

                                  1 Reply Last reply Reply Quote 0
                                  • W Offline
                                    wgtthompson
                                    last edited by wgtthompson

                                    The example (dated 4/20/2018) works for me when the modem connects to an AT&T service. It never works if the modem decides to connect to a Verizon service. I am using a GPy and a Hologram SIM.

                                    I can tell which service because the Hologram dashboard shows the service for a specific session.

                                    For AT&T, the modem waits to attach for about 10-20 sec. While waiting to attach, the signal quality starts at +CSQ: 99,99 (RSSI known) and transitions to +CSQ: 20,99 (RSSi known). The registration state starts at +CEREG: 2,0 and changes to +CEREG: 2,2. The modem then transitions to attached, then connects, and works like a charm.

                                    For Verizon, the modem never attaches (I let it loop for an hour once). While waiting to attach, the signal quality will oscillate between +CSQ: 99,99 (RSSI unknown) to +CSQ: 20,99 (RSSi known) roughly ever loop. The registration state starts at +CEREG: 2,0 and then changes to +CEREG: 2,4

                                    Anybody got thoughts?

                                    Note: the example I used has date 4/20/2018 in the code and is posted by @tlanier. I did not use the 4/15/2018 version in his/her original post.

                                    T 1 Reply Last reply Reply Quote 0
                                    • T Offline
                                      tlanier @wgtthompson
                                      last edited by

                                      @wgtthompson

                                      To get the program to work, I had to set the carrier to "verizon" in the LTE function call

                                      lte = LTE(carrier="verizon")

                                      Hologram states that their SIM works with multiple carriers. I don't understand how that works if I'm having to specify the carrier in the initialization.

                                      We need Pycom and Hologram to clarify what is the correct method to initialize the LTE object and what carriers can we expect to connect to.

                                      W 1 Reply Last reply Reply Quote 0
                                      • W Offline
                                        wgtthompson @tlanier
                                        last edited by

                                        @tlanier Yes, I used lte = LTE(carrier='verizon') and can only connect to the local AT&T service.

                                        1 Reply Last reply Reply Quote 0
                                        • W Offline
                                          wgtthompson
                                          last edited by wgtthompson

                                          I've noticed that setting a carrier other than verizon such as LTE(carrier='at&t') or LTE(carrier='standard') results in my modem not being able to connect to any carrier, ever. Setting the carrier back to verizon does not fix it. A reset does not fix it. A power cycle does not fix it. The only way I've found that fixes this problem is to re-flash the modem firmware.

                                          I really don't see why this is even a constructor argument. Looking at the source code for modlte.c, it looks like it is setting the test conformance mode using the AT command AT+SQNCTM in the INIT phase of the modem. The AT manual for this modem specifically cautions for this command that "The change will be effective after the device’s reboot." I don't see a device reboot occurring in the code. It looks like the carrier argument is modifying a modem setting that won't take effect until a modem reboot.

                                          This is an undocumented part of the LTE API.

                                          '''
                                          Changing carrier from the current setting in the modem.  The carrier value is stored through power cycle by the modem.  If the carrier setting is changed then a reset needs to follow for the value to take effect.
                                          '''
                                          lte = LTE(carrier=NEW_VALUE)
                                          lte.reset()  #  cycle modem for new carrier to take effect
                                          
                                          #  ... now use the object as normal...
                                          
                                          T C 2 Replies Last reply Reply Quote 1
                                          • T Offline
                                            tlanier @wgtthompson
                                            last edited by

                                            @wgtthompson

                                            I do not believe the source code that you see in github is the code we are actually running currently. The reason I say that is I noticed extensive changes made to the modlte.c code a few weeks ago, and I have not seen any indication that an update has been made available to download.

                                            1 Reply Last reply Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 2 / 5
                                            • First post
                                              Last post

                                            Pycom on Twitter

                                            Pycom