Fipy + Pytrack + LTE [hardware bug?]
-
Hi,
I have been testing the Pytrack with a Fipy as well as with a Gpy. The same code is executed on the Fipy and Gpy.
The GPy + Pytrack combo works, the Fipy + Pytrack combo does not.
I enable the LTE, connect to the network and sync the RTC via NTP.
The Fipy does not make it past:
lte = LTE()If I put the Fipy on an expansion board (v3), it works.
The modem's firmware is 33988 and I have tried the 1.17.3 and the 1.18.0 on the Fipy as well.
I though that maybe it was a power issue, so I have tried running it with a battery too. No luck.
Is this a known problem? Any suggestions?
Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login