FiPy as Gateway
-
Hello all,
Initially I have registered my FiPy as a device and Dragino LG-01 as Gateway. Dragino was shown not connected on TTN. I checked the configuration many times, but it didnot work.
So I wanted to check if its the issue withe Gateway or Server. So now, I registered the same FiPy as Gateway. This is the result I got on minicom.configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059c �ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059c �ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059cI trasferred main.py and config.py to
/flashfolder and nanogateway.py to/flash/lib/folder. Then I did factory reset as I could not find Wifi access point. deleted the nanogateway.py from libraries and put that file along with main.py in falsh folder.
The device does not enter REPL mode at all.Can one anyone suggest what would have gone wrong.
Can I delete the device registration of FiPy from TTN -
@amket Not sure what went wrong but I suggest re-flashing the device with the firmware updater and selecting the option "Erase flash file system" in the Communication window. This will make sure all custom scripts are erased from the device.
Did you use the code from https://github.com/pycom/pycom-libraries/tree/master/examples/lorawan-nano-gateway
You should be able to delete your gateway in the TTN console by choosing settings and using the "Delete gateway ...." link at the bottom.
-
Hello @Xykon ,
I wanted to delete the application, I did it.
I did update the device with firmware making sure to erase the flash file.Just wanted to confirm, which of the files from the link you mentioned above, I should be uploading to get my device working as nano gateway.
Sorry the question might seem lame, but just dont want the FiPy to stop working
-
@amket The whole process is explained in https://docs.pycom.io/chapter/tutorials/lora/lorawan-nano-gateway.html
For the nano gateway the files are main.py, config.py and nanogateway.py all of which should be uploaded to the /flash folder on the device after making the necessary modifications.
-
Hi ,
@Xykon I did do what have been mention by you. The result is the same. My device doenot enter REPL at all. -
This is what the result look like
configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059c ?ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div?????????Ғ??Ҫ???UI=9}IMQ????5Յ} JJC??Vp: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059c ets???? 00:22:57 ??ᗼLB?=]I=9}IMQ?,boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:1728 load:0x4009fa00,len:0 load:0x4009fa00,len:14584 entry 0x400a059c ?E (414) esp_image: Checksum failed. Calculated 0xbb read 0xa8 -
@amket How are you uploading the files?
-
@xykon I did it over FTP on Terminal(ubuntu) .
usr@usr-ThinkPad-T460s:~$ ftp 192.168.4.1 Connected to 192.168.4.1. 220 Micropython FTP Server Name (192.168.4.1:amulya): micro 331 Password: 230 Remote system type is UNIX. Using binary mode to transfer files. ftp> passive Passive mode on. ftp> bin 200 ftp> cd /flash 250 ftp> put nanogateway.py local: nanogateway.py remote: nanogateway.py 227 (192,168,4,1,7,232) 150 226 8859 bytes sent in 0.00 secs (67.5888 MB/s) ftp> ls 227 (192,168,4,1,7,232) 150 -rw-rw-r-- 1 root root 506 Jan 1 00:01 main.py drw-rw-r-- 1 root root 0 Jan 1 00:00 sys drw-rw-r-- 1 root root 0 Jan 1 00:00 lib drw-rw-r-- 1 root root 0 Jan 1 00:00 cert -rw-rw-r-- 1 root root 0 Jan 1 00:00 boot.py -rw-rw-r-- 1 root root 571 Jan 1 00:01 config.py -rw-rw-r-- 1 root root 8859 Jan 1 00:01 nanogateway.py 226 ftp>I should also mention, after I wrote you a reply, I thought of adding another antenna for wifi and check, I am not very sure if thats the reason but it seemed to work . It entered REPL mode.
But it wasn't consistent. It breaks and enters REPL.
CAn you tell me if there is anything to do with Wifi connection -
This post is deleted! -
Sorry for the inconvinience. I did not notice it earlier. It is taking time to connect to wifi so it takes time to enter REPL.
-
@amket Thanks for the feedback, I'll look into adding some output such as "Connecting to Wifi network..." to make it more clear what is happening.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login