LTE NB-IoT getting started issues in Australia
-
Ok.
So I have updated the firmware (1.18.1r1) and loaded the Sequans updates for NB-IoT.
I have inserted the SIM provided by Vodafone.
I am now attempting to use the tutorials documentation just to go through the motions using a terminal connection to test the system.I get as far as the lte.send_at_cmd('AT!="zsp0:npc 1"') command and the device returns
'\r\nCommand zsp0::npc unknown\r\n\r\nOK\r\n'Have I done something wrong or is there a problem?
All commands prior just returned OK.
Peter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login