Prevent anyone can download my code over serial

[robert-hh]

@dserrano You dio in in several levels/step, which both require the ability for you to create your own images:

1. Level 1: Embed your code as frozen bytecode. Then it is not visible at the command prompt level, but still a falsh dump woudl get access to the bytecode, which then has to be disassembled. The only visible part of the code would be boot.py and optionally main.py. But these can be short and almost empty, just calling your embedded code.
2. Level 2: Additionally, encrypt the flash. This is supported by the build environment.

[dserrano]

@robert-hh Hello Robert thanks for your replay.

How can I Embed your code as frozen bytecode?

[dserrano]

@combaindeft said in Prevent anyone can download my code over serial:

B) compile it and flash your WiPy with your own custom firmware

Hi there!

How can I compile and flash your WiPy code?

[johand]

@dserrano The instructions for compiling your own firmware (including your own frozen code) and encrypt it can be found here: https://github.com/pycom/pycom-micropython-sigfox

[Paul Thornton]

@johand said in Prevent anyone can download my code over serial:

@dserrano The instructions for compiling your own firmware (including your own frozen code) and encrypt it can be found here: https://github.com/pycom/pycom-micropython-sigfox

^this is likely the best way to help avoid the code being dumped.

[crumble]

@paul-thornton said in Prevent anyone can download my code over serial:

I tried to follow the instructions to build the firmware for a LOPY but esptools.py failed on

import serial

Adding pyserial with pip3 was not the solution. Running this on a hyper-v debian. Big plan was to compile on VM and use windows host for upload. Does the python module works only when a serial is present?

[johand]

@crumble I managed to build and encrypt the WiPy firmware (should be the same) using Windows Subsystem for Linux (https://docs.microsoft.com/en-us/windows/wsl/install-win10) running Ubuntu. I installed pyserial with "pip install pyserial". What is the error you get?

[crumble]

@johand

I used pip3 to install pyserial-3.4 But serial cannot be found

ImportError: No module named serial

[johand]

@crumble I am far from an Python expert, so just guessing... Could it be that you use pip3 instead of pip that I use (I think I got som problems trying to use Python 3)? What if you run "pip list", does pyserial show up as installed?

[crumble]

@johand

aaahhh, you are right. Micropython is python 3 but the build tool uses python 2. Totally forgot that this still exists on PCs

Thanks ;)

[svonbentzel]

@dserrano I am also interested in this howto ;-)