Unable to connect with Firmware Upgrade tool in windows 7
-
I have tried the sugestions i have found in similar treads in this forum with no success.
When i try to upgrade i get unable to connect
i can connect with putty and then get
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for downloadi have used flash debug tool and got this
i have one Expansion Board and two LoPy and they behave the same.
what else can i do?
-
look here
https://forum.pycom.io/post/2655 -
I found the problem, the jumper for the TX pins were missing, i used the BAT jumper for the time beeing.
Now the upgrade works,Thanx for the link, that was one post i had not read yet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login