FiPy upload failed
-
Hello Robert, I tried to find out how to update the FiPy firmware and couldn't find the link. Could you kindly point one for me?
@robert-hh said in FiPy upload failed:Before reloading the FiPy, you could try to connect it using a pure terminal emulator like Putty (windows) or screen (OS X and Linux). Using that it is easier to tell the state of the FiPy. It avoids the potential trouble caused by pymakr.
In addition, is there a link on how to use putty to detect the state of the FiPy? Many thanks.
-
@justin if you get a REPL prompt in Putty and can enter commands, then the FiPy interface is OK. You have to disable flow control in the Putty serial interface settings. Try something like Ctrl-D, which should reboot the device. Ctrl-B should show the firmware revision. Or enter just any Python statement, like:
print("Hello World") -
@robert-hh hello Robert, I tried following your instruction. However, I was not able to type in the Putty window. This is how the putty window looks like.
-
@justin This is what I got when I opened Atom.
-
@justin In Putty, what happens after connection, when you push the reset button on the LoPy?
-
@robert-hh Please see the screenprint below. I was still not able to type.
-
@justin That looks like a physically sane device. It indicates the pybytes firmware. I do not know if that is what you wanted. If not, use the pycom updater to install the regular firmware.
-
@robert-hh That's weird. I was not able to upload using Atom. I am sure the pysense is ok as I tested it with another fipy which can perform upload normally.
-
@justin Atom is not the right tool for firmware update of the Fipy. You have to use the Pycom Updater: https://pycom.io/wp-content/uploads/2018/08/pycom_firmware_update_1.15.1 (1).exe.zip
-
@robert-hh Many thanks Robert. I have just done the firmware update for the FiPy and it is working normally now. I was confused in the beginning about the firmware for the Pysense and firmware for the FiPy. Many thanks for the patient explanation.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login