GPy only shows band 13 supported

[reidfo]

I'm trying to debug some issues where currently I am only able to connect to Verizon, and I don't even see other carriers listed in AT+COPS=? or AT+SQNMONI=9. I used to have a similar problem, but I was only able to connect to AT&T (though I did see Verizon listed).

In my troubleshooting, I ran AT!="showcaps" and on my GPy modules I see:

== CAPS config =============================
  .Lock UE on SRV band    : false
  .MFBI support           : true
  .TM8 TDD support        : false
============================================
== CAPS ====================================
  . access stratum: R13
  . catM          : 1
  . nb-IoT        : 0
-- EUTRA bands --
  . supported     : 13
  . board         : 3/4/12/13/20/28
  . admin         : 13
  . pending admin :
-- EUTRA carriers --
  . admin         :
  . pending admin :
============================================

On my older FiPy I see the output I would expect:

== CAPS config =============================
  .Lock UE on SRV band    : false
  .MFBI support           : true
  .TM8 TDD support        : false
============================================
== CAPS ====================================
  . access stratum: R13
  . catM          : 1
  . nb-IoT        : 0
-- EUTRA bands --
  . supported     : 28/20/13/12/4/3
  . board         : 3/4/12/13/20/28
  . admin         :
  . pending admin :
-- EUTRA carriers --
  . admin         :
  . pending admin :
============================================

Does this mean I am only able to scan and connect using band 13 on the GPy? I have tried AT!="addScanBand band=2", but I still only see band 13 in the supported list.

[noviniumJeef]

Im having the same issue my self now, did you happen to figure out what the issue is?

[a.papkovskiy]

I have the same issue. Did you manage to fix it?