Problem on updating Expansion board V3.1

[hiyasbie]

@rskoniec Thank you for checking this out. I am using my macbook pro with the problem. My friends has a laptop (Windows) which he used to update his expansion board successfully. When I tried to update my expansion board on his laptop, it was successful...Would this mean that m expansion board is already updated? can I used it on my macbook? Thank you very much for your reply.

[shanefowler25]

Hi @hiyasbie, I'm having the same issue on my MacBook Air. Were you able to update your firmware using your MacBook Pro or was your workaround solution just use your friend's laptop w/Window's to update your expansion board?

[astro]

I have the same issue on a macbook when trying to update the Pytrack module:

Match vendor ID from file: 04d8
Match product ID from file: f014
Opening DFU capable USB device...
ID 04d8:f014
Run-time device DFU version 0100
Claiming USB DFU Runtime Interface...
dfu-util: Cannot set alt interface zero

[catalin]

@astro @hiyasbie
I was also able to reproduce on a macOS 10.15.1. Sometimes executing the command with sudo dfu-util -D expansion31_0.0.11.dfu helps.
Most likely, this due to some new Security & Privacy feature.

Just to mention, it's not related to Expansion v3.1 manufacturing issues.

[msbettyhunt]

@hiyasbie quite complex answer

[crbn60]

Am I missing the solution in this post? I still can't seem to update the board.

[Gijs]

As Catalin mentioned, the issue is with MacOS, any other operating system should work fine!

[macfreek]

Sorry to reply to an older thread. The dfu-util problem was caused by a bug in libusb, that only occurs on macOS in libusb 1.0.23 or 1.0.24. Either downgrade to libusb 1.0.22, or upgrade to 1.0.25 (once that becomes available), or use a different platform (Linux or Windows).

[catalin]

Thanks a lot, @macfreek!

[Andrew Sinclair]

This worked for me on mac catalina
brew unlink libusb
brew unlink dfu-util
brew install libusb --HEAD
brew install dfu-util --HEAD

[Rainer Treichel]

@Andrew-Sinclair said in Problem on updating Expansion board V3.1:

This worked for me on mac catalina
brew unlink libusb
brew unlink dfu-util
brew install libusb --HEAD
brew install dfu-util --HEAD

using my old macAir with HighSiera, this solved the problem
I had to 'brew uninstal'l the packages, unlink was not enough.
libusb was installed with an extra patch.

==> Installing dependencies for libusb: m4, autoconf, automake and libtool
==> Installing libusb dependency: m4
==> Patching
==> Applying secure_snprintf.patch
patching file lib/vasnprintf.c
Hunk #1 succeeded at 4858 (offset -11 lines).
==> ./configure --prefix=/usr/local/Cellar/m4/1.4.18

libusb: stable 1.0.24, HEAD
dfu-util installed without problems
and the result is:

Rainers-MacBook-Air% dfu-util -D pysense_0.0.8.dfu 
dfu-util 0.10-dev

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Match vendor ID from file: 04d8
Match product ID from file: f011
Deducing device DFU version from functional descriptor length
Opening DFU capable USB device...
Device ID 04d8:f011
Device DFU version 0100
Claiming USB DFU (Run-Time) Interface...
Setting Alternate Interface zero...
Determining device status...
DFU state(2) = dfuIDLE, status(0) = No error condition is present
dfu-util: WARNING: Device already in DFU mode? (bState=2 dfuIDLE)
Claiming USB DFU Interface...
Setting Alternate Interface #0 ...
Determining device status...
DFU state(2) = dfuIDLE, status(0) = No error condition is present
DFU mode device DFU version 0100
Device returned transfer size 64
Copying data from PC to DFU device
Download	[=========================] 100%        16384 bytes
Download done.
DFU state(2) = dfuIDLE, status(0) = No error condition is present
Done!