Help: pytrack V2.0 sensor header information
-
I need some help and could not find information about physical characteristics of the pytrack2 I2C sensor header (called "pyport" on the board). I think I need some sort of plug for this if I am to add my own sensors but can't work out what to look for that will fit exactly. Is there a specific name for the part, or is there a pycom accessory I should be buying to plug into this header?
Thanks
-
In the near future, we will have sensosr in our webshop to attach to this PyPort. Now in the meantime, the connector is for a 6 pin ribbon cable with 1.27mm pin pitch available from most of the well known vendors. The part number: Amphenol 20021511-00006T4LF. Be careful as it is not the regular sized 2.54mm pin pitch connector
Best,
Gijs
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login