LoRaWAN ABP example
bmarkus last edited by bmarkus
Practically LoRa/LoRaWAN functions are not ducomented. Found nothing about
- how to configure, display, etc. channels used by LoraWAN stack
- how to setup DR, Spreading factor and other parameters
- is there a unique HWEUI available
- how to use ABP
There is only an incomplete OTA example without channel settings, only the join part shown :(
Can someone provide a complete ABP example?
What is the ETA for a usable, minimal documentation? In the module index nothing about the LoRa functionality in the network module part.
@LoneTech nice, should be easy to use this directly in the auth setup so one doesn't have to hardcode the DevEUI
bmarkus last edited by
Thanks, it looks the HWEUI. On my board I get a similar value except the different few last digits as expected.
Haven't a clue about most of those bits, but I expect there is a unique HWEUI available. For example I found these IDs by introspection:
>>> binascii.hexlify(network.LoRa().mac()) b'70b3d5499a6b6439' >>> binascii.hexlify(machine.unique_id()) b'240ac400c004' >>> binascii.hexlify(network.WLAN().mac()) b'240ac400c004'
The LoRa MAC address should be the HWEUI value (it's an 8-byte EUI, whereas the WiFi one is 6-byte).